myslimetracker
sanbungi
Components (27)
| Reference | Value | Description |
|---|---|---|
| U1 | TPS61291DRVR | |
| U2 | LSM6DSV16BTR | |
| U3 | XC6210B332MR | 700mA, Low Drop-out Voltage Regulator, Fixed Output 3.3V, SOT-23-5 |
| U4 | ESP32-C3-MINI-1-N4 | |
| C1,C8 | 10uF | Unpolarized capacitor |
| C2,C3 | 22uF | Unpolarized capacitor |
| C4,C5 | 100nF | Unpolarized capacitor |
| C6,C7,C10,R8 | TBD | Resistor,Unpolarized capacitor |
| C9,C11 | 0.1uF | Unpolarized capacitor |
| D1-D3 | LED | Light emitting diode |
| J1,J3,J4 | Conn_01x01 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Conn_01x07_Pin | Generic connector, single row, 01x06, script generated |
| J6 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| J7 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J8 | Conn_01x08_Pin | Generic connector, single row, 01x08, script generated |
| J9 | UART | Generic connector, single row, 01x04, script generated |
| J10 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| JP4,JP5 | Jumper_2_Open | Jumper, 2-pole, open |
| L1 | 3.3uH | Inductor |
| R1,R2 | 4.7k | Resistor |
| R3,R4 | 5.1K | Resistor |
| R5,R10 | 10K | Resistor |
| R6,R7,R9 | 0 | Resistor |
| R11-R13 | 680 | Resistor |
| SW1 | SW_DPDT_x2 | Switch, dual pole double throw, separate symbols |
| SW2 | SW_Push | Push button switch, generic, two pins |
| SW3 | RESET | Push button switch, generic, two pins |