Falcon-Edge
rmingon
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.
Components (26)
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-WROOM-32 | |
| U2,U5 | TPS562200 | 2A Synchronous Step-Down Voltage Regulator, Adjustable Output Voltage, 4.5-17V Input Voltage, SOT-23-6 |
| U4 | RFM95W-868S2 | Low power long range transceiver module, SPI and parallel interface, 868 MHz, spreading factor 6 to12, bandwidth 7.8 to 500kHz, -111 to -148 dBm, SMD-16, DIP-16 |
| U6 | BMP280 | |
| U8 | CH340C | |
| U9 | BMI160 | |
| BOOT1,EN1 | SW_Push | |
| C1-C3,C6,C8,C10-C12,C14,C15,C18 | C | |
| C7,C9 | 0.1µF | |
| C16,C17,C19 | 100nF | Unpolarized capacitor, small symbol |
| C20 | 10nF | Unpolarized capacitor, small symbol |
| D1,D2,D8 | LED | Light emitting diode |
| J1,J5 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J3,J4,J8 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | MDT320B03001 | |
| L1,L2 | 4.7uH | Inductor |
| P1 | USB_C_Plug | USB Type-C Plug connector |
| R1,R4,R5 | R_Small | |
| R2,R3 | 4.7k | |
| R6 | 500 | Resistor, small symbol |
| R7,R10,R40 | 1.1K | Resistor, small symbol |
| R8,R9,R11,R13 | 10K | |
| R12 | 54.9K | |
| R14 | 33.0K | |
| TP1,TP2 | TestPoint | test point |