Falcon-Edge
rmingon
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.
Components (25)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | BSS138 | |
| U1 | ESP32-WROOM-32 | |
| U3 | CH340C | |
| U4 | RFM95W-868S2 | Low power long range transceiver module, SPI and parallel interface, 868 MHz, spreading factor 6 to12, bandwidth 7.8 to 500kHz, -111 to -148 dBm, SMD-16, DIP-16 |
| U5 | MPU-6050 | |
| U6 | BMP280 | |
| U8,U10 | TPS562200 | 2A Synchronous Step-Down Voltage Regulator, Adjustable Output Voltage, 4.5-17V Input Voltage, SOT-23-6 |
| BOOT1,EN1 | SW_Push | |
| C4-C10,C14-C18 | C | |
| C19,C20,C38,C39 | 10u | |
| C21,C40 | 0.1µF | |
| C22,C23,C41,C42 | 22u | |
| D2 | LED | |
| J1 | USB_B_Micro | USB Micro Type B connector |
| J2 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J3-J6,J8 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| J11 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J12 | Conn_02x04_Odd_Even | Generic connector, double row, 02x04, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1,L2 | 4.7uH | Inductor |
| R1-R5 | R_Small | |
| R6,R8-R10 | 10K | |
| R7 | 33.0K | |
| R11 | 55K |