smart-blind-control
rijn
Components (47)
| Reference | Value | Description |
|---|---|---|
| Q1 | MCG30P03-TP | P-MOSFET enchancement mode transistor, generic symbol, Alternate KiCAD Library |
| Q2,Q3 | MMBT2222 | NPN SOT-23 transistor, 30V, 600mA, 225mW, Alternate KiCAD Library |
| U1 | HUSB238 | |
| U2 | TPS562202 | 2A Synchronous Step-Down Voltage Regulator 580kHz, adjustable output voltage, 4.5-17V Input Voltage, 0.804V-7V Output Voltage, SOT-563 |
| U3 | TLV75533PDBV | 500mA Low Dropout Voltage Regulator, Fixed Output 3.3V, SOT-23-5 |
| U4 | DRV8871DDA | Brushed DC Motor Driver, PWM Control, 45V, 3.6A, Current limiting, HTSOP-8 |
| U5 | INA180A1 | Current Sense Amplifier, 1 Circuit, Rail-to-Rail, 26V, Gain 20 V/V, SOT-23-5 |
| U6 | ESP32-C3 | ESP32-C3 family is an ultra-low-power MCU-based SoC solution that supports 2.4 GHz Wi-Fi and Bluetooth®Low Energy (Bluetooth LE). |
| U7 | W25Q16JVUXIQ | 32Mb Serial Flash Memory, Standard/Dual/Quad SPI, SOIC-8 |
| U8 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U9 | APDS-9306-065 | Ambient Light Sensor, I2C interface, 1.7-3.6V, DFN-6 |
| AE1 | ANT3216LL00R2400A | Antenna |
| C1 | 1uF 35V | Unpolarized capacitor |
| C2,C3 | 10uF 25V | Unpolarized capacitor |
| C4,C5,C13,C15,C16,C32 | 100nF 50V | Unpolarized capacitor |
| C6 | 22pF | Unpolarized capacitor |
| C7,C8,C11,C17 | 22uF | Unpolarized capacitor |
| C9,C20,C22,C25,C35 | 1uF | Unpolarized capacitor |
| C10 | 100uF | Unpolarized capacitor |
| C12,C29,C30,R4,R24-R27 | DNP | Polarized capacitor,Resistor,Unpolarized capacitor |
| C14 | 100uF >12v | Unpolarized capacitor |
| C18,C19,C24,C28,C31 | 100nF | Unpolarized capacitor |
| C21,C23 | 10nF | Unpolarized capacitor |
| C26,C27 | 12-18pF | Unpolarized capacitor |
| C33 | 3.3pF | Unpolarized capacitor |
| C34 | 2.5pF | Unpolarized capacitor |
| D1 | WS2812B-2020 | RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Conn_01x02_MountingPin | Generic connectable mounting pin connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Motor | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Downloader | Generic connector, double row, 02x03, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | L | Inductor |
| L2 | 2nH 500mA | Inductor |
| L3 | 2.2nH | Inductor |
| R1 | 5.1k | Resistor |
| R2 | 49.9k | Resistor |
| R3,R5,R9-R11,R28 | 10k | Resistor |
| R6 | 34.8k | Resistor |
| R7 | 33k | Resistor |
| R8 | 0.1 | Resistor |
| R12,R13 | 4.7k | Resistor |
| R14 | 22nH/22R | Resistor |
| R15-R19,R22,R23 | 0 | Resistor |
| R20,R21 | 499 | Resistor |
| SW1 | EN | Single Pole Single Throw (SPST) switch |
| SW2,SW3 | BOOT | Single Pole Single Throw (SPST) switch |
| Y1 | 40MHz TROQ R940000171 | Four pin crystal, GND on pins 2 and 4 |