Loading design…
rice-eclipse
ECLIPSE: AFS
| Reference | Value | Description |
|---|---|---|
| U1 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U2 | RP2350B-QFN80 | |
| U3 | MMC5983MA | |
| U4 | ICM-45686 | LGA-14(3x2.5) Accelerometers ROHS |
| U5 | MS5611-01BA | Barometric pressure sensor, 10cm resolution, 10 to 1200 mbar, I2C and SPI interface up to 20MHz, LGA-8 |
| U6 | TMP117xxDRV | Digital Temperature Sensor with I2C/SMBus Interface, 16 bits, ±0.3°C, one-shot conversion, alert, nist traceable, EEPROM, WSON |
| U8 | KX134-1211 | |
| U9,U13 | TPS2121RUXR | |
| U10 | INA219AxDCN | Zero-Drift, Bidirectional Current/Power Monitor (0-26V) With I2C Interface, SOT-23-8 |
| U11 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U12,U14 | AP62150WU | 1.5A, 1.3MHz Buck DC/DC Converter, 4.2V-18V input voltage, 0.8V-7V adjustable output voltage, TSOT-23-6 |
| U15 | 74AHCT541 | 8-bit Buffer/Line Driver 3-state outputs |
| C1,C2,C4-C12,C17,C21,C23-C25,C28-C30,C34,C38,C41,C46-C49,C51 | 100n | Ceramic Capacitor,Unpolarized capacitor |
| C3,C14-C16 | 4.7u | Unpolarized capacitor |
| C13,C20,C36,C40,C42,C50 | 10u | Unpolarized capacitor |
| C18,C19 | 15p | Unpolarized capacitor |
| C22,C31-C33,C37 | 1u | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C35,C39 | 22u | Unpolarized capacitor |
| C44,C45 | 100u | Unpolarized capacitor |
| D1,D2,D4,D5 | RED_LED | Light emitting diode |
| H1-H4 | MountingHole | |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J5 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J6,J9,J13,J18,J19,J26 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| J7,J8,J10,J11,J14-J17 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | MSD-4-A | |
| J27,J29-J31 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
| L1-L3 | 3.3u | Inductor |
| R1-R3 | 33 | Resistor |
| R4,R17 | 100 | Resistor |
| R5,R11,R12 | 1k | Resistor |
| R6,R25 | 330 | Resistor |
| R7-R10 | 5.1k | Resistor |
| R15,R16,R20,R21,R23,R24,R28,R29 | 100k | Resistor, small US symbol |
| R18,R22,R27 | 47k | Resistor,Resistor, small US symbol |
| R19 | 2m | Resistor |
| R26 | 15k | Resistor |
| R30 | 68k | Resistor |
| R31 | 13k | Resistor |
| R32-R37 | 10k | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| TP4-TP14 | TestPoint_Small | test point |
| Y1 | ABM8-272-T3 | Four pin crystal, GND on pins 2 and 4 |