frank
rh1tech
RP2350 Based Hardware Emulation Platform
Components (52)
| Reference | Value | Description |
|---|---|---|
| Q1 | BC847 | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U1 | SN74LS04 | Hex inverter,SN74LS04N DIP14 25pcs |
| U2 | SN74LS74 | Flip Flops Dual Pos-Edge-Trig D-Type Flip-Flop |
| U3 | 74HC4052D | 74HC(T)4052 - Dual 4-channel analog multiplexer/demultiplexer@en-us |
| U4 | 8086_Min_Mode | 8086 (minimum mode), 16-Bit HMOS Microprocessor, PDIP-40 |
| U5 | Pimoroni PGA2350 | |
| U6 | MP1584EN-LF-Z | Switching Voltage Regulators 3A 1.5MHz 28V Nonsync Buck |
| U7,U8 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| C1,C4 | 100u | Polarized capacitor, small symbol |
| C2,C3,C5,C6,C9,C11,C12,C15 | 100n | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C7 | 680u | Polarized capacitor, small symbol |
| C8,C13 | 10u | Unpolarized capacitor, small symbol |
| C10 | 150pF | Unpolarized capacitor, small symbol |
| C14 | 220u | Polarized capacitor, small symbol |
| C16 | 470pF | Unpolarized capacitor |
| D1 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D2 | 1N5822 | Schottky diode |
| D3 | 1N5819WS | Schottky diode |
| J1 | 8086_Pins_Left | Generic connector, single row, 01x20, script generated |
| J2 | 8086_Pins_Right | Generic connector, single row, 01x20, script generated |
| J3 | PWR | Generic connector, single row, 01x03, script generated |
| J4 | UART | Generic connector, single row, 01x03, script generated |
| J5 | Debug | Generic connector, single row, 01x03, script generated |
| J6 | Buzzer | 7.5 mm, 3.6 Vo-p, 80 dB, Surface Mount (SMT), Magnetic Audio Transducer Buzzer |
| J7 | 104031-0811 | Micro SD Card Socket |
| J8 | SJ1-3525N | 3.5 mm, Stereo, Right Angle, Through Hole, 3 Conductors, 2 Internal Switches, Audio Jack Connector |
| J9 | DC-005-5A-2.0 | |
| J10 | USB4215-03-A | |
| J11 | 676430910 | USB Type A connector |
| J12 | RCA-103 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J13 | D-SUB 15 Female | |
| JP1 | Direct | Generic connector, single row, 01x02, script generated |
| JP2 | VGA VS | Generic connector, single row, 01x02, script generated |
| L1 | 22uH | Inductor, small symbol |
| L2,R20-R22 | 330R | Ferrite bead,Resistor |
| LD1 | Green | Light emitting diode |
| LD2 | Red | Light emitting diode |
| R1-R3,R5,R11,R24-R26 | 1K | Resistor |
| R4 | 10K | Resistor |
| R6,R16-R19 | 22R | Resistor |
| R7,R9,R10 | 100K | Resistor |
| R8 | 24K | Resistor |
| R12 | 8.2K | Resistor |
| R13 | 43K | Resistor |
| R14,R15 | 5.1K | Resistor, small symbol |
| R23 | 75R | Resistor |
| R27,R28 | 100R | Resistor |
| S1 | SS12D00 | Direct Insert Single Pole Double Throw (SPDT) 30V Plugin Slide Switches ROHS |
| S2 | Boot | C & K COMPONENTS - KMR221G LFS - SWITCH, SPST, 0.05A, 32VDC, SMD |
| S3 | Reset | C & K COMPONENTS - KMR221G LFS - SWITCH, SPST, 0.05A, 32VDC, SMD |
| S4 | SW_DIP_x02 | 2x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| S5 | SK12D07VG3NS | Direct Insert Single Pole Double Throw (SPDT) 30V Plugin Slide Switches ROHS |