frank
rh1tech
RP2350 Based Hardware Emulation Platform
Components (56)
| Reference | Value | Description |
|---|---|---|
| U1 | TS3USB221RSER | High-Speed USB 2.0 1:2 Multiplexer/Demultiplexer Switch with Single Enable, UQFN-10 |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U3 | MW7211A | |
| U4 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-89 |
| U5 | 74HC4052D | 74HC(T)4052 - Dual 4-channel analog multiplexer/demultiplexer@en-us |
| U6 | TXS0104ERGYR | Texas Instruments TXS0104ERGYR, Voltage Level Translator, Open Drain, 1.65 3.6 V, 2.3 5.5 V, 14-Pin |
| U7 | ESP-PSRAM64H | |
| U8 | W25Q128JVS | |
| U9 | CD4069UBM | |
| U10 | RP2350 | |
| U11 | ESP-01v090 | ESP8266 ESP-01 module, v090 |
| U12 | TDA1387T | |
| U13 | LM358 | Low-Power, Dual Operational Amplifiers, DIP-8/SOIC-8/TO-99-8 |
| C1,C5,C8-C17,C20,C21,C24-C33,C35,C43,C44 | 100n | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C2,C3,C34,C36-C42 | 10u | Polarized capacitor, small symbol,Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C4,C7 | 22u | Polarized capacitor, small symbol |
| C6,C18,C19,C22,C23 | 4.7u | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| D1 | 1N5819WS | Schottky diode |
| D2,D3 | 3V3 | Zener diode |
| J1 | DEBUG | Generic connector, single row, 01x03, script generated |
| J2 | UART | Generic connector, single row, 01x03, script generated |
| J3 | PWR | Generic connector, single row, 01x03, script generated |
| J4 | SS-52100-004 | USB Type A connector, stacked |
| J5 | USB4215-03-A | |
| J6 | MDC-036 | 6-pin Mini-DIN connector |
| J7,J12 | PJ-320D | |
| J8 | DC3RX19JA2 | |
| J9 | GP2 | |
| J10 | Conn_02x05_Top_Bottom | Generic connector, double row, 02x05, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | VGA | |
| J13 | Ext_Sound | Generic connector, double row, 02x05, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J14 | 104031-0811 | Micro SD Card Socket |
| L1,R29-R31 | 330R | Ferrite bead,Resistor |
| L2 | 3.3u | Inductor |
| LD1 | Green | Light emitting diode |
| LD2 | Blue | Light emitting diode |
| R1-R4,R6,R15,R17,R18,R40-R45 | 10K | Resistor,Resistor, small symbol |
| R5,R7-R9,R13,R14 | 22R | Resistor |
| R10,R11 | 5.1K | Resistor, small symbol |
| R12,R23,R24,R27,R28,R32-R34 | 1K | Resistor |
| R16 | 0R | Resistor |
| R19 | 4.7K | Resistor |
| R20,R21 | 100K | Resistor |
| R22 | 33R | Resistor |
| R25,R26 | 27R | Resistor |
| R35-R37,R50 | 100R | Resistor,Resistor, small symbol |
| R38,R39 | 470R | Resistor, small symbol |
| R46,R47 | 47K | Resistor |
| R48,R49 | 20K | Resistor |
| RN1,RN2 | 270R | 4 resistor network, parallel topology |
| S1 | SS12D00 | Direct Insert Single Pole Double Throw (SPDT) 30V Plugin Slide Switches ROHS |
| S2 | SW_DIP_x02 | 2x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| S3,S4,S7,S8 | RP Reset | C & K COMPONENTS - KMR221G LFS - SWITCH, SPST, 0.05A, 32VDC, SMD,Push button switch, generic, two pins |
| S5 | SK12D07VG3NS | Direct Insert Single Pole Double Throw (SPDT) 30V Plugin Slide Switches ROHS |
| S6 | ESP Reset | C & K COMPONENTS - KMR221G LFS - SWITCH, SPST, 0.05A, 32VDC, SMD |
| Y1 | ASE-12MHz | 3.3V CMOS SMD Crystal Clock Oscillator, Abracon |