antenna-board
proveskit
The PROVES Kit Antenna Boards! By convention the Z+ Top Cap of the satellite.
Components (18)
| Reference | Value | Description |
|---|---|---|
| Q1 | DMP4047LFDE-7 | |
| U1 | BQ25886RGE | Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24 |
| U2 | DZDH0401DW-7 | |
| C1,C2 | 10uF | Unpolarized capacitor |
| C3 | 47nF | Unpolarized capacitor |
| C4 | 4.7uF | Unpolarized capacitor |
| C5 | 1uF | Unpolarized capacitor |
| J2 | Battery Charge Bypass | |
| J3 | FC Reset Jumper | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | FC USB Bootselect Jumper | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | WDT Disable Jumper | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| L5 | SPM6530T-1R0M120 | 1uH |
| R7,R8 | 22 | USB Termination Resistor |
| SW1,SW2 | KMR2 | |
| SW3 | SW_Push_SPDT | Momentary Switch, single pole double throw |
| TP1 | USBBOOT | |
| TP2 | RESET |