opentherm-wolf-cwl
philipparndt
Components (34)
| Reference | Value | Description |
|---|---|---|
| Q1 | BC858A | 0.1A Ic, 30V Vce, PNP Transistor, SOT-23 |
| U1,U2 | PC817 | DC Optocoupler, Vce 35V, CTR 50-300%, DIP-4 |
| U3 | ESP32-S3-WROOM-1-N16R8 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U4 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U5 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U6 | LMR16006YQ5 | Simple Switcher Buck Regulator, Vin=4-40V, Iout=600mA, Fixed 5.0V output voltage, SOT-23-6 package |
| C1,C3,C6,C9,C12 | 0.1uF | Unpolarized capacitor |
| C2,C8,C11 | 22uF | Unpolarized capacitor |
| C4,C5,C7 | 1uF | Unpolarized capacitor |
| C10 | 100nF | Unpolarized capacitor |
| D1-D4 | 1N4148WS | Diode |
| D5 | BZT52C4V7 | Zener diode |
| D6 | BZT52C15 | Zener diode |
| D7 | BZT52C4V3 | Zener diode |
| D8,D11,D12 | SS14 | 40V 1A Schottky Diode, SMA |
| F1 | Polyfuse_Small | Resettable fuse, polymeric positive temperature coefficient, small symbol |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | OpenTherm | Generic connector, single row, 01x02, script generated |
| J3 | OLED | Generic connector, single row, 01x04, script generated |
| J4,J5 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J6 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| L1 | 6.8uH | Inductor |
| LED1,LED2 | Green | Light emitting diode |
| MH1-MH4 | M3 | Mounting Hole with connection |
| R1,R4 | 330 | Resistor |
| R2 | 220 | Resistor |
| R3 | 100 | Resistor |
| R5 | 1.5k | Resistor |
| R6,R7,R11 | 10k | Resistor |
| R8,R10 | 1k | Resistor |
| R9 | 0 | Resistor |
| R12,R13 | 5.1k | Resistor |
| SW1 | EC12E24204A9 | Rotary encoder, dual channel, incremental quadrate outputs, with switch |
| SW2,SW3 | SW_Push | Push button switch, generic, two pins |