PH60
ph-design
A printable 60% multi-layout wireless keyboard suite.
Components (42)
| Reference | Value | Description |
|---|---|---|
| U1 | TLV62569DBV | High Efficiency Synchronous Buck Converter, Adjustable Output 0.6V-5.5V, 2A, SOT-23-5 |
| U2 | RP2040 | A microcontroller by Raspberry Pi |
| U3 | W25Q16JVSS | 16Mbit / 2MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 (208 mil) |
| U4 | LGS5500EP | LiPo charger and 5V boost converter, 4.5-5.5V input, 4.2-4.4V battery, 400-1000mA charge current, 800mA boost output, SOIC-8-1EP |
| U5 | CH582F | RISC-V MCU with BLE/2*USB/ADC/PWM/SPI/I2C/4*UART |
| AE1 | Antenna_Shield | Antenna with extra pin for shielding |
| BT1 | Battery | Multiple-cell battery |
| C1-C9,C19 | 100n | Unpolarized capacitor |
| C10,C11,C25 | 1u | Unpolarized capacitor |
| C12,C14 | 20p | Unpolarized capacitor |
| C13,C17,C20 | 10u | Unpolarized capacitor |
| C16 | 4.7u | Unpolarized capacitor |
| C18 | 100u | Unpolarized capacitor |
| C21 | 20u | Unpolarized capacitor |
| C26 | 0.1u | Unpolarized capacitor |
| C27-C29 | 2u2 | Unpolarized capacitor |
| D1 | PRTR5V0U2X | Ultra low capacitance double rail-to-rail ESD protection diode, SOT-143 |
| D2 | PTVS5V0P1UP | SOD-128 Unidirectional TVS diode, 5V, 600W, Alternate KiCAD Library |
| D3-D63 | DIODE | Diode |
| F1 | 1000ma | Resettable fuse, polymeric positive temperature coefficient, small symbol |
| H1-H6 | MountingHole | Mounting Hole without connection |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3-J7 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J8 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| L1,L2 | 2.2uH | Inductor |
| L3 | 22uH | Inductor |
| R1,R2 | 5K1 | Resistor |
| R3,R4 | 1R | Resistor |
| R5,R8 | 1k | Resistor |
| R6 | 442k | Resistor |
| R7,R11 | 100k | Resistor |
| R9 | 33k | Resistor |
| R10,R12-R15 | 10k | Resistor |
| RGB1-RGB61 | WS2812B | RGB LED with integrated controller |
| S1-S61 | MX1A | Push button switch, generic, two pins |
| ST1-ST4 | MX_stab | Cherry MX-style stabilizer |
| SW1 | SW_SPDT_321 | Switch, single pole double throw |
| TH1 | 10k_NTC | Temperature dependent resistor, negative temperature coefficient |
| Y1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |
| Y2 | X322532MOB4SI | Four pin crystal, GND on pins 2 and 4 |
| Y3 | XKXGI-SUA-32.768K | Two pin crystal |