stm32f103c8t6-qwiic
petrovgp
SparkFun Qwiic-comaptible STM32F103C8T6 breakout board
Components (19)
| Reference | Value | Description |
|---|---|---|
| U1 | STM32F103C8Tx | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U2 | ME6211C33M5G-N | |
| C1,C2,C8-C10,C12 | 100n | Unpolarized capacitor |
| C3,C4 | 6p | Unpolarized capacitor |
| C5,C6 | 15p | Unpolarized capacitor |
| C7,C16,C17 | 10u | Unpolarized capacitor |
| C11,C13 | 1u | Unpolarized capacitor |
| C14 | 10n | Unpolarized capacitor |
| D1-D3 | RED | Light emitting diode |
| FB1 | 120R | Ferrite bead |
| J1-J3 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J4,J5 | Conn_01x16_Pin | Generic connector, single row, 01x16, script generated |
| J6 | USB_C_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| R1-R4 | 5.1k | Resistor |
| R5,R6 | 1k | Resistor |
| R7 | 470R | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| Y1 | NX3225SA-16.000M-STD-CSR-1 | Four pin crystal, GND on pins 2 and 4 |
| Y2 | ABS07-32.768KHZ | Two pin crystal |