| U1 | NCP1117ST33T3G | 1A Low drop-out regulator, Fixed Output 3.3V, SOT-223 |
|---|
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
|---|
| U3 | W25Q128JVS | |
|---|
| U5 | RP2040 | |
|---|
| U22,U23 | CD4051BM96 | CMOS single 8-channel analog multiplexer demultiplexer, TSSOP-16/DIP-16/SOIC-16 |
|---|
| C1,C2,C20 | 10u | |
|---|
| C3 | 4.7nF | Unpolarized capacitor |
|---|
| C4-C12,C15 | 100n | |
|---|
| C13,C14,C21-C52 | 1uF | Unpolarized capacitor |
|---|
| C18,C19 | 15p | |
|---|
| D1 | LED | Light emitting diode |
|---|
| J1 | TYPE-C-31-M-12 | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J2 | SWD | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| K0-K15 | DRV5056A3xQDBZxR | Unipolar 50 mV/mT,+79-mT, 20-kHz, 3.3/5V, SOT-23 |
|---|
| R1,R9,R30 | 10k | |
|---|
| R2,R3 | 5.1k | |
|---|
| R5,R13,R32 | 1k | |
|---|
| R7 | 1M | Resistor |
|---|
| R8 | 470 | Resistor |
|---|
| R10,R11 | 27 | 27 Ohm resistor. On JLCPCB, basic parts would be available if specify 0603 package |
|---|
| R14-R29 | 100 | Resistor |
|---|
| SW3,SW4 | SW_Push | Push button switch, generic, two pins |
|---|
| Y1 | ABM8-272-T3 | |
|---|
