link
oro-os
The Oro OS CI/CD pipeline including PCBs, CAD files, firmware and server infrastructure
Components (76)
| Reference | Value | Description |
|---|---|---|
| IC1 | IS31FL3236A-TQLS4-TR | Constant Current LED Driver 3.3V/5V T/R |
| Q1-Q3 | PMV20ENR | Trans Mosfet N-ch 30V 7.6A 3-PIN SOT-23 T/r |
| U1 | STM32F479VGT6 | High-performance advanced line, ARM Cortex-M4 core with DSP and FPU, 1 Mbyte Flash, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, Dual QSPI, TFT, MIPI-DSI |
| U2 | CAHCT1G14QDBVRQ1 | Automotive single 4.5V-to-5.5V inverter with Schmitt-trigger inputs 5-SOT-23 -40 to 125 |
| U3 | TS3DV416DGGR | 1.65-Gbps 4-channel differential 8-to-16 and 16-to-8 mux for DVI 1.0/HDMI 1.2a applications 48-TSSOP -40 to 85 |
| U4,U5 | W5500 | Chip; Ethernet controller; TCP/IP, MAC, PHY; 32KB; 15Mbps; Fast SPI; 3.3V; SMD LQFP-48 |
| U6 | USB3340-EZK-TR | Microchip USB3340-EZK-TR; USB Transceiver; USB 2.0 at 480Mbit/s; 5.5V; 32-Pin QFN |
| U7 | ADG772BCPZ-1REEL | CMOS Low Power Dual 2:1 Mux/Demux USB 2.0 (480 Mbps)/USB 1.1 (12 Mbps) |
| U8 | TPS6734ID | Fixed 12-V 120-MA Boost-Converter Supply 8-SOIC -40 to 85 |
| U9 | LTC4415EMSE | Dual 4A Ideal Diodes with Adjustable Current Limit |
| U10,U11 | TPS2021D | 0.6A loading, 2.7-5.5V, 33mΩ USB power switch, active-low 8-SOIC -40 to 85 |
| U12 | LM1085ISX-3.3/NOPB | 3-A, 29-V, linear voltage regulator 3-DDPAK/TO-263 -40 to 125 |
| U13 | INA226AIDGSR | 36V, 16-bit, ultra-precise i2c output current/voltage/power monitor w/alert 10-VSSOP -40 to 125 |
| U14 | NC7SZ86P5X | XOR 7SZ86 EAR99 7SZ logic gate circuit 5.4ns @ 5V 50pF 1mm 32mA 32mA 3.3V |
| B1 | 009159010061911 | |
| B3 | REX025664AWAP3N00000 | |
| C1,C3,C5-C12,C36,C39,C43,C44,C58-C64,C73,C82-C88,C106,C112,C117,C123,C139,C143,C149,C152,C153,C155,C158,C165,C168,C171,C174,C178,C182,C185 | 0.1u | Multilayer Ceramic Capacitor, 0.1 uF, 25 V, ± 10%, X5R, 0402 [1005 Metric] - T&R |
| C2,C24-C31,C35,C38,C47,C48,C74-C80,C98-C104,C108-C110,C113,C118-C121,C124,C141,C142,C148,C151,C156,C157,C164,C167,C170,C173,C177,C181,C184 | 1u | Capacitor, ceramic, 0402, 6.3V, x5R, 1 F, ±10% Rohs Compliant: Yes |Taiyo Yuden JMK105BJ105KVHF |
| C4,C16-C23,C37,C40,C45,C46,C65-C72,C90-C96,C107,C111,C116,C122,C127,C128,C133,C134,C140,C144,C150,C154,C159,C166,C169,C172,C175,C179,C180,C183,C186 | 0.01u | Ceramic Capacitor, Multilayer, Ceramic, 16V, 5% +Tol, 5% -Tol, X7R, 15% TC, 0.01uF, Surface Mount, 0402 |
| C13-C15 | 2.2u | Multilayer Ceramic Capacitors (High dielectric type), 16V, 2.2 uF, ± 10 %, 0402, X6S, RoHS |
| C32-C34,C49,C50,C105,C114,C115,C125,C126,C145-C147 | 4.7u | Multilayer Ceramic Capacitors MLCC - SMD/SMT 25VDC 4.7F 20% X5S |
| C41,C42 | 10u TANTALUM | T491, Tantalum, MnO2 Tantalum, Commercial Grade, 10 uF, 20%, 20 VDC, SMD, MnO2, Molded, 2 Ohms, 3528, Height Max = 2.1mm |
| C51,C52,C54,C55,C176 | 22u | 6.3V 22uF X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS,CAP; SMT (0603); 22UF; 20%; 16V; X5R; CERAMIC |
| C53,C56 | 1mF ELECTROLYTIC | SMD 1000uF 25V 12,5x12,5x16 105°C |
| C81 | 0.001u | MULTILAYER CERAMIC CHIP CAPACITORS, 1608, Commercial grade, general (Up to 75V) |
| C89,C97 | 33u | Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT(TM), Molded Case, Standard Industrial Grade |
| C129,C130 | 1nF >=3kV | Multilayer Ceramic Chip Capacitor WCAP-CSMH Series 1808 1000pF X7R1808102KC00DFCT10000 |
| C131,C132 | 22nF | Surface Mount Ceramic Multilayer Capacitor 0.022uF -20% to 80% Y5V 16V 0402 Paper T/R |
| C135-C138 | 6.8nF | SMD Comm C0G, Ceramic, 6800 pF, 1%, 50 VDC, C0G, SMD, MLCC, Ultra-Stable, Low Loss, Class I, 0603 |
| C160-C163 | 10u >=16V | Ceramic Capacitor, Ceramic, 25V, 20% +Tol, 20% -Tol, X5R, 15% TC, 10uF, Surface Mount, 0603 |
| CR1,CR3,CR4,CR6,CR7 | SMF6V0A-M3-08 | ESD PROTECTION DIODE SMF DO219AB |
| CR2,CR5,CR10 | USBLC6-2P6 | ESD Protection for USB 2.0 High Speed |
| D1 | SS12 | ON Semi SS12 SMT Schottky Diode, 20V 1A, 2-Pin DO-214AC |
| F1 | 2A | Fuse Subminiature Slow Blow Acting 2A 350V Radial 8.35 X 4 X 7.8mm Thermoplastic Ammo Automotive |
| F2 | 4A | Fuse Subminiature Slow Blow Acting 4A 350V Radial 8.35 X 4 X 7.8mm Thermoplastic Ammo Automotive |
| J1 | STLINK-V3MINIE | |
| J2 | MEM2061-01-188-00-A | Memory Card Connectors Micro SD Push Push, Closed, SMT, 1.88mm profile, No Peg, T&R |
| J3 | SACC-DSIV-M12MS-5CON-L180 | Sensor/actuator flush-type plug, 5-pos., M12, A-coded, rear/screw mounting with M12 thread, with polarity protection, with straight solder connection |
| J4,J5,J11,J13,J14,J16,J18 | 68021-204HLF | Headers & Wire Housings 4P SR UNSHRD HRD .38 GOLD OVER NI |
| J6 | FFC2B35-10-T | 10 Position FFC, FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle |
| J7,J19 | USB4105-GF-A | USB Connector, 24 Contact(s), Female, Right Angle, Solder Terminal, Locking, Receptacle |
| J8,J9 | ARJM11B1-009-AB-EW2 | Modular Conn/ethernet Conn RJ45 Jack W/mag 1X1 Rohs Compliant: Yes |
| J10 | 3-2328724-1 | 31PIN 0.3MMP FPC CONNECTOR,FRONT FLIP |
| L1 | CD54NP-180MC | Inductor Power Unshielded Drum Core 18uH 20% 2.52MHz Ferrite 1.23A 150mOhm DCR T/R |
| L2,L3 | BLM18PG221SN1D | Ferrite Beads Multi-Layer 220Ohm 25% 100MHz 1.4A 100mOhm DCR 0603 Paper T/R |
| LED1-LED7,LED9-LED11 | 150120M173000 | Standard LEDs - SMD WL-SFCW SMT Full-color Chip LED waterclear 1206 RGB |
| LED8,LED16,LED17,LED20-LED23,LED25-LED27 | CLM3C-WKW-CXAYA453 | Cree CLM3C-WKW-CXAYA453, CLM3 Series White LED, 5500K, PLCC 2, Rectangle Lens SMD Package |
| LED12,LED18,LED19,LED24 | APT1608VRCXF_A-5MAV | Standard LEDs - SMD 1608 SMD LED Cyan |
| LED13-LED15 | AA3528VRVFS_A | LED Uni-Color Violet 2-Pin SMD T/R |
| R1,R2,R6,R12 | 4.7K | CRCW0402-HP 100 4K7 1% ET7 E3 |
| R3-R5,R7,R9,R10,R16-R19,R24-R26,R29,R31,R32,R34,R35,R40-R45,R72,R73,R75-R82,R89,R93-R96 | 10K | Res Thick Film 0402 10K Ohm 1% 0.063W ±100ppm/°C Molded SMD Paper T/R |
| R8,R11 | 100R-1K | Thick Film Resistors - SMD 165OHM 1/16WATT 1% |
| R13-R15,R20,R21,R27,R37,R46-R53,R74,R83,R87,R88 | 1K | Res Thick Film 0805 1K Ohm 5% 0.5W(1/2W) ±100ppm/C Pad SMD Automotive T/R |
| R22,R23 | 56K | Res Thick Film 0603 56K Ohm 5% 1/10W ±200ppm/°C Molded SMD Punched Carrier T/R |
| R28 | WSKW06122L000FEA | WSKW0612 .002 1% EA e3 |
| R30 | 510K | Thick Film Resistors - SMD 510K ohm 5% |
| R33 | 20K <=5% | MCS 0402-50 1% E0 20K |
| R36 | 8.06K <=1% | Thin Film Resistors - SMD 0402 8.06Kohm .1% AEC-Q200 |
| R38,R39 | 12.4K <=1% | D10/CRCW0402 100 12K4 1% ET7 e3 |
| R54,R55 | 10R <=1% | Res Thin Film 0402 10 Ohm 0.5% 0.063W ±100ppm/°C Molded SMD Punched Carrier T/R |
| R56-R63 | 49.9R <=1% | Res Thin Film 0402 49.9 Ohm 1% 0.063W(1/16W) ±50ppm/C Pad SMD T/R |
| R64-R71 | 33R <=1% | Res Thin Film 0402 33 Ohm 0.5% 0.063W(1/16W) ±100ppm/C Pad SMD T/R |
| R84 | 165R-167R | Thick Film Resistors - SMD 165OHM 1/16WATT 1% |
| R85,R86,R90-R92 | 470K | Vishay CRCW Series Thick Film Surface Mount Resistor 402 Case 470k +/-1% 0.063W +/-100ppm/C |
| SW1 | TL6400AF160QJ | Tactile Switch, SPST-NO, OFF-(ON), 50 mA, 12V DC, J-Lead, IP67, TL6400 Series | E-Switch TL6400AF260QJ |
| TP1 | 5V | test point |
| TP2 | 3V3 OUT | test point |
| TP3 | USB PWR 5V VBUS | test point |
| TP4 | GND | test point |
| TP8,TP9 | 1.2V@25C | test point |
| TP10 | 1.22V REF | test point |
| TP13-TP27,TP29,TP30 | OLED_CS | test point |
| TP28 | 5V-AUX PRE-FUSE | test point |
| TP31 | 5V PRE-FUSE | test point |
| Y1,Y2 | ECS-2520SMV-240-FP-TR | Standard Clock Oscillators FACTORY NOT ACCEPTING ORDERS |
| Y3,Y4 | ECS-TXO-2520MV-250-AN-TR | TCXO Oscillators MultiVolt OSC TCXO 25.000MHZ CMOS SMD ECS-TXO-2520MV 25MHz CMOS +1.7V +3.6V +/-2.5ppm -40 C 85 C - Surface Mount 0.098" L x 0.079" W (2.50mm x 2.00mm) 0.035" (0.90mm) 4-SMD, No Lead (DFN, LCC) |