CNC
ondras12345
My CNC 1610 and Stepcraft model 600 configuration and CNC-related notes
Components (26)
| Reference | Value | Description |
|---|---|---|
| Q1 | BC847 | 0.1A Ic, 45V Vce, NPN Transistor, SOT-23 |
| U1 | ATmega16-16A | 16MHz, 16kB Flash, 1kB SRAM, 512B EEPROM, JTAG, TQFP-44 |
| U2,U3 | 74HC595D | 8-bit serial in/out Shift Register 3-State Outputs |
| AFF1,AFF2 | LTS-547AHC | DISPLAY 7 SEGMENTS common K, high efficient red |
| C1,C3-C5,C7-C11,C14 | C | Unpolarized capacitor |
| C2 | 22uF / 10V | Polarized capacitor |
| C6 | 220uF / 16V | Polarized capacitor |
| C12 | 1000 uF / 25V | Polarized capacitor |
| C13 | 10u / 10V | Polarized capacitor |
| D1 | LED | Light emitting diode |
| D2,D3 | D | Diode |
| J1 | Conn_02x08_Odd_Even | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J3 | AVR-ISP-6 | Atmel 6-pin ISP connector |
| J4 | Conn_01x10 | Generic connector, single row, 01x10, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1-R15,R26 | 1k | Resistor |
| R16,R19 | 22k | Resistor |
| R17 | 680 | Resistor |
| R18,R21,R25 | 3k3 | Resistor |
| R20,R23 | 2k2 | Resistor |
| R22 | 10k | Resistor |
| R24 | 56 | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| SW2 | RotaryEncoder | Rotary encoder, dual channel, incremental quadrate outputs |
| SW3 | SW_DPDT_x2 | Switch, dual pole double throw, separate symbols |
| Y1 | Crystal_GND2 | Three pin crystal, GND on pin 2 |