Loading design…
npeixoto64
A full product project that watches windows with wireless sensors and has a gateway for the main door with wireless sensors. When you open the exit door to leave, it checks:
| Reference | Value | Description |
|---|---|---|
| IC1 | STM8L151K4T6 | STM8L151K4T6, 8 bit STM8 Microcontroller 16MHz 1 kB, 16 kB Flash, 2 kB RAM, I2C 32-Pin LQFP |
| IC2 | CC1101RGPR | Low-Power Sub-1GHz RF Transceiver |
| IC3 | LT1615ES5-1#TRMPBF | Linear Technology LT1615ES5-1#TRMPBF, Step Up DC-DC Converter, 300mA, 5-Pin SOT-23 |
| IC4 | MIC4427YM | Gate Drivers 1.5A Dual High Speed MOSFET Driver |
| IC5 | MB85RC64TAPNF-G-BDERE1 | 64kbit FRAM with I2C serial interface, 1.8V, 3V- SOP8 T&R |
| Q1 | IRLML6402TRPBF | MOSFET MOSFT P-Ch -3.7A 65mOhm 8nC Log Lvl |
| U1 | 2462 | KEYSTONE - 2462 - BATTERY HOLDER |
|---|
| ANT1 | ANT-868-HESM | 868MHz ISM, LPWA Helical RF Antenna 862MHz ~ 876MHz 5.6dBi Solder Through Hole |
|---|
| C1,C2,C5,C8,C10-C12,C14-C17,C24 | 100nF | Unpolarized capacitor |
|---|
| C3 | 10nF | Unpolarized capacitor |
|---|
| C4,C7,C13 | 1uF | Unpolarized capacitor |
|---|
| C6,C9 | 47uF, 6.3V | Unpolarized capacitor |
|---|
| C18,C19,C125 | 12pF | Unpolarized capacitor |
|---|
| C20 | 22uF, 6.3V | Unpolarized capacitor |
|---|
| C21 | 4.7pF | Unpolarized capacitor |
|---|
| C22,C23 | 4.7uF, 25V | Unpolarized capacitor |
|---|
| C121 | 1pF | Unpolarized capacitor |
|---|
| C122,C131 | 1.5pF | Unpolarized capacitor |
|---|
| C123 | 3.3pF | Unpolarized capacitor |
|---|
| C124 | 100pF | Unpolarized capacitor |
|---|
| D1 | MBR0520LT3G | Guardring for Stress Protection; Very Low Forward Voltage (0.38 V Max @ 0.5 A, 25 C); 125 C Operating Junction Temperature; Epoxy Meets UL94, VO at 1/8"; Package Designed for Optimal Automated Board Assembly Mechanical Characteristics; Reel Options: MBR0520LT1 = 3,000 per 7" reel/8 mm tape. MBR0520LT3 = 10,000 per 13" reel/8 mm tape.; Device Marking: B2; Polarity Designator: Cathode Band; Weight: 11.7 mg (approximately); Case: Epoxy, Molded; Finish: All External Surfaces Corrosion Resistant and Terminal Lea |
|---|
| FB1 | BLM18KG601SN1D | BLM18_N1D Series EMI Suppression Filter 600+/-25% at 100MHz 1.3A @85 |
|---|
| J1 | G8250041000YEU | Board mount - Header Plug - Pin Header 2.0mm Pitch Vertical,1x4Pin,Gold Flash,LCP,4.0mm*2.0mm*2.8mm |
|---|
| J2 | M20-9770342 | 2.54mm (0.1") Pitch SIL Vertical Throughboard Pin Header, 5.8mm mating pin height, selective gold + tin, 3 contacts |
|---|
| L2 | CD43NP-100MC | Fixed Inductors 10uH 1.04A 20% 2.52MHz SMD PWR IND |
|---|
| L121,L123,L124,L131 | 12nH | Inductor |
|---|
| L122,L132 | 18nH | Inductor |
|---|
| LED1 | WP710A10LVBC_D | Standard LEDs - Through Hole 3MM LOW CURRENT BLUE LED |
|---|
| LED2 | TLHY4400-AS12Z | Standard LEDs - Through Hole Yel 10mcd; 3mm 581-594nm, 2.4V Typ |
|---|
| LED3 | TLHR4400-AS12Z | Standard LEDs - Through Hole Red 13mcd; 3mm 612-625nm; 2V Typ |
|---|
| LS1 | PKMCS1818E20A0-R1 | Buzzers Transducer, Externally Driven Piezo 12 V 2kHz 100dB @ 12V, 10cm Surface Mount Solder Pads |
|---|
| R1,R3,R15 | 100K | Resistor, US symbol |
|---|
| R2,R5,R20 | 1M | Resistor, US symbol |
|---|
| R4,R11,R12 | 10K | Resistor, US symbol |
|---|
| R6 | 510K | Resistor, US symbol |
|---|
| R7 | 1K | Resistor, US symbol |
|---|
| R8 | 100 | Resistor, US symbol |
|---|
| R9,R10 | 50 | Resistor, US symbol |
|---|
| R13 | 56K | Resistor, US symbol |
|---|
| R16 | 130K | Resistor, US symbol |
|---|
| R17 | 1.15M | Resistor, US symbol |
|---|
| R18,R19 | 33R | Resistor, US symbol |
|---|
| S1 | MASM-14R-8-10 | Magnetic / Reed Switches 8-10 AT 200Vdc @ 10W |
|---|
| S2 | TL6120DF160QG | TACT, 50mA, 12VDC SPST-NO, Off-(On) Surface Mount |
|---|
| Y1 | NX3225GA-26.000M-STD-CRG-2 | 26MHz 8pF +/-20ppm +/-30ppm SMD3225-4P Crystals ROHS Operating Temperature -40~+85 |
|---|