can_distance_sensor
nlbutts
Components (35)
| Reference | Value | Description |
|---|---|---|
| Q2 | AO3401A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| U1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U2 | L78M05ABDT-TR | |
| U3 | XC6206P282MR-G | Torex XC6206P282MR-G 200-mA Ultra-Low-Iq LDO, 0.8V, SOT-23-3 |
| U4 | XC6206P332MR-G | Torex XC6206P332MR-G 200-mA Ultra-Low-Iq LDO, 0.8V, SOT-23-3 |
| U6 | TCAN1044A-Q1 | High-speed CAN-FD Transceiver |
| U7 | VL53L3CXV0DH/1 | |
| U8 | TCA9509DGKR | |
| U9 | STM32G0B1KBUx | STMicroelectronics Arm Cortex-M0+ MCU, 128KB flash, 144KB RAM, 64 MHz, 1.7-3.6V, 30 GPIO, UFQFPN32 |
| C1,C15,C17,C26-C28 | 4.7u | |
| C2,C3,C8,C23-C25 | 0.1u | |
| C4 | 2.2u | |
| C9,C10 | 15p | |
| C16,C20 | 10u | |
| C22 | 1u | |
| D1,D5 | D_Schottky | |
| D2,D3 | LED | |
| D6 | D_Zener | Zener diode |
| D7-D9 | SP0502BAHT | |
| J2 | Conn_ARM_JTAG_SWD_10 | Cortex Debug Connector, standard ARM Cortex-M SWD and JTAG interface |
| J3 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | USB_C_Receptacle | USB Full-Featured Type-C Receptacle connector |
| R2,R6 | 1K | |
| R3,R16 | 100k | |
| R4,R5 | 22 | |
| R7 | 4.7k | |
| R8,R9 | 330 | |
| R17 | 10k | |
| R18 | 120 | |
| R19,R20,R22 | 10K | |
| R21,R23 | 2.2k | |
| SW1 | PTS645SK50SMTR92LFS | |
| TP1-TP14 | TestPoint | |
| Y1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |