midi2BLE
nikhilsudhir
MIDI 2 Bluetooth converter project
Components (29)
| Reference | Value | Description |
|---|---|---|
| U1 | BQ24075RGT | USB-Friendly Li-Ion Battery Charger and Power-Path Management, VQFN-16 |
| U2 | TPS62162DSG | 1A Step-Down Converter with DCS-Control, fixed 3.3V output, 3-17V input voltage, WSON-8 |
| U3 | MT3608 | High Efficiency 1.2MHz 2A Step Up Converter, 2-24V Vin, 28V Vout, 4A current limit, 1.2MHz, SOT23-6 |
| U4 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U5 | TPS2116DRL | 2 Channnels Power Mux with Manual and Priority Switchover, 1.6-5.5V Input Voltage, 2.5A Output Current, Ron 40 mOhm, SOT-583-8 |
| U6 | TS3USB30EDGSR | ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, TSSOP-10 (Texas DGS0010A / VSSOP) |
| C1-C4,C7,C12 | 10uF | Unpolarized capacitor |
| C5,C6,C9-C11,C13-C16 | 100nF | Unpolarized capacitor |
| C8 | 22uF | Unpolarized capacitor |
| D3 | SS14 | 40V 1A Schottky Diode, SMA |
| J1 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J2 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x07 | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 2.2uH | Inductor |
| L2 | 4.7uH | Inductor |
| R1,R2 | 5.1k | Resistor |
| R3 | 680 | Resistor |
| R4 | 1k | Resistor |
| R5,R6,R10,R14,R15 | 10k | Resistor |
| R7 | 180k | Resistor |
| R8 | 51k | Resistor |
| R9,R12,R16,R18 | 100k | Resistor |
| R11 | 100 | Resistor |
| R13 | 220k | Resistor |
| R17 | 27k | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| SW3 | SW_SPDT | Switch, single pole double throw |
| TP1-TP9 | TestPoint | test point |