kicad-demo-projects
nickradfc
Components (29)
| Reference | Value | Description |
|---|---|---|
| U1 | BM15x | |
| U2 | nPM1300-QEXX | PMIC, LED Driver, Battery Charger, QFN-32 |
| U3 | TPD3E001DRLR | TPD3E001 Low-Capacitance 3-Channel ESD-Protection for High-Speed Data Interfaces |
| U4 | W25Q16JVUXIQ | 32Mbit / 4MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, WSON-8 |
| U5 | nRF52833-QDXX | |
| U6 | TXB0106RGY | 6-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.2 - 3.6V APort, 1.65 - 5.5V BPort, VQFN-16 |
| C1,C12,C16,C17,C19,C24,C25 | 100nF | Unpolarized capacitor, small symbol |
| C2-C4,C8 | 10uF | Unpolarized capacitor, small symbol |
| C5,C6,C15,C22 | 1uF | Unpolarized capacitor, small symbol |
| C7,C9,C10,C23 | 4.7uF | Unpolarized capacitor, small symbol |
| C11 | 2.2uF | Unpolarized capacitor, small symbol |
| C13,C14 | 300pF | Unpolarized capacitor, small symbol |
| C18,C20 | 12pF | Unpolarized capacitor, small symbol |
| C21 | 100pF | Unpolarized capacitor, small symbol |
| D1 | LED_Small | Light emitting diode, small symbol |
| D3 | LED_ARGB | RGB LED, anode/red/green/blue |
| J3 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J4 | Conn_01x02_MountingPin | |
| J5 | Conn_01x04_MountingPin | |
| J6 | Conn_01x05_MountingPin | Generic connectable mounting pin connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 2.2uH | Inductor, small symbol |
| R1,R8 | 100kR | Resistor, small US symbol |
| R4 | 330kR | Resistor, small US symbol |
| R5,R7 | 10kR | Resistor, small US symbol |
| R6 | 470R | Resistor, small US symbol |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| TP1-TP3,TP5-TP12 | TestPoint | test point |
| Y1 | 32.768KHz | Two pin crystal, small symbol |
| Y2 | 32MHz | Four pin crystal, GND on pins 2 and 4, small symbol |