Loading design…
monash-human-power
Power meter designed as part of Oscar Varney and Jotham Gates' FYP in 2024
| Reference | Value | Description |
|---|---|---|
| Q1 | AS2302 | N-MOSFET transistor, gate/source/drain |
| U1 | ESP32-S3-MINI-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, SMD, onboard antenna |
| U2 | P3T1755 | I2S, I3S temperature sensor. |
| U3 | TPS61023DRLR | |
| U4 | TPD3E001DRLR | TPD3E001 Low-Capacitance 3-Channel ESD-Protection for High-Speed Data Interfaces |
| U5 | ADS1232IPW | Single Bridge 24bit ADC for Sensors, TSSOP-24 |
| C1,C2 | 1u | Unpolarized capacitor |
| C3-C7,C14,C15 | 22u | Unpolarized capacitor |
| C8-C13 | 0.1u | Unpolarized capacitor |
| D1 | CLX6F-FKC-CNP1ST1E1BB7D3D3 | RGB LED |
|---|
| D3 | LED | Light emitting diode |
|---|
| D4 | PMEG6030ELPX | Schottky diode |
|---|
| F1 | SMD1206B200TF | Resettable fuse, polymeric positive temperature coefficient |
|---|
| FB1 | MH2029-300Y | Ferrite bead |
|---|
| J1 | Crank interconnect | Generic connector, single row, 01x08, script generated |
|---|
| J2 | Debug | Generic connector, single row, 01x05, script generated |
|---|
| J3 | Spare GPIO pins | Generic connector, single row, 01x06, script generated |
|---|
| J4 | Battery | Single-cell battery |
|---|
| J5 | USB4120-03-C_REVA | USB Connector |
|---|
| J6 | Side A | Generic connector, single row, 01x04, script generated |
|---|
| J7 | Side B | Generic connector, single row, 01x04, script generated |
|---|
| L1 | 470n | Inductor |
|---|
| MT1 | ICM-42670-P | Accelerometer and gyroscope |
|---|
| R1,R2 | 10k | Resistor |
|---|
| R3,R4,R19 | 150 | Resistor |
|---|
| R5 | 320 | Resistor |
|---|
| R6-R9 | 5.1k | Resistor |
|---|
| R10,R14-R16 | 47 | Resistor |
|---|
| R11,R12 | 1M | Resistor |
|---|
| R13 | 470 | Resistor |
|---|
| R17 | 453k | Resistor |
|---|
| R18 | 100k | Resistor |
|---|
| SW1 | EN | Push button switch, generic, two pins |
|---|
| SW2 | BOOT | Push button switch, generic, two pins |
|---|
| TP1 | 5V | test point |
|---|