m3d_mipt_study
molnija3d
Components (23)
| Reference | Value | Description |
|---|---|---|
| U1 | STM32F103C8T6 | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U2 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U3 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
| C1,C2 | 10pF | Unpolarized capacitor |
| C3,C4,C6,C8-C11 | 0.1uF | Unpolarized capacitor |
| C5 | 10n | Unpolarized capacitor |
| C7 | 4.7uF | Unpolarized capacitor |
| C12,C13 | 10uF | Polarized capacitor |
| C14-C18 | 0.1u | Unpolarized capacitor |
| D1 | ESDA5V3SC5 | Quad TVS Diode Array, 5.3V Standoff, 4 Channels, 400W, ±30kV, SOT-23-5 |
| D2 | ESDALC6V1-1U2 | ESD Protection Diode, SOD-523 |
| D3 | SMLVT3V3 | ESD Protection Diode, SOD-523 |
| D4 | ESDA6V1L | TVS Diode Array, 5.5V Standoff, 2 Channels, SOT23 |
| FB1 | 110@100mHz | Ferrite bead |
| J1 | USB_B_Micro | USB Micro Type B connector |
| J2 | SWD | Generic connector, single row, 01x04, script generated |
| R1,R2 | 1M | Resistor |
| R3 | 1.5k | Resistor |
| R4-R12,R18,R21 | 10k | Resistor |
| R13-R17 | 100R | Resistor |
| R19,R20 | 22R | Resistor |
| SW1-SW5 | SW_Push | Push button switch, generic, two pins |
| Y2 | X322516MLB4SI | Four pin crystal, GND on pins 2 and 4 |