synkie
mirdej
The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann
Components (24)
| Reference | Value | Description |
|---|---|---|
| Q1 | AO3401A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| U1 | HUSB238_xxxDD | USB-PD Sink IC Port Controller, VBUS = 3..25V, USB Type-C rev. 1.4, USB-PD rev. 3.0, BC1.2, WDFN-10 / WSON-10 |
| U2 | TMR-1221 | 2W DC/DC industrial converter regulated, 9-18V input, ±5V fixed output voltage, 200mA each output, 1.6kVDC isolation, SIP-8 |
| C20 | 100n | Unpolarized capacitor |
| D1,D2 | LED | Light emitting diode |
| FB1 | Ferrite_Bead | |
| J1-J3,J9-J11,J14-J17 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4-J8,J22-J25 | sync | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12,J13,J18,J19 | Conn_01x14 | Generic connector, single row, 01x14, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J20 | Conn_01x16_Pin | Generic connector, single row, 01x16, script generated |
| J21 | Conn_01x10_Pin | Generic connector, single row, 01x10, script generated |
| J26 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J28-J33 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| J34 | DONT PLACE | DC Barrel Jack with an internal switch and a mounting pin |
| J35,J37 | Coax | |
| J36 | USB_C_Receptacle_USB2.0 | |
| JP1 | Jumper_2_Open | Jumper, 2-pole, open |
| R1 | 10 | Resistor |
| R2 | 30k | Resistor |
| R3,R4 | 10k | Resistor |
| R9 | 100k | Resistor |
| R12,R13 | 2k2 | |
| TP2,TP3 | TestPoint | test point |
| TP9,TP11,TP18 | TP | test point |