raspberrypi-io-board
midarubiccube
Components (81)
| Reference | Value | Description |
|---|---|---|
| Module1 | Compute Module 5 | RaspberryPi Compute module 5 |
| U1 | 74LVC1G07SE-7 | |
| U2 | STM32H723VGT6 | STMicroelectronics Arm Cortex-M7 MCU, 1024KB flash, 564KB RAM, 550 MHz, 1.71-3.6V, 82 GPIO, LQFP100 |
| U3 | RT9742GGJ5 | |
| U4,U12 | ASEK-32.768KHZ-L-R-T | |
| U5 | AP64502QSP-13 | Switching Voltage Regulators DCDC Conv HV Buck SO-8EP T&R 4K |
| U6 | AP64502 | |
| U7 | AP22653W6 | |
| U8 | CH221K | |
| U9 | LAN8742A | LAN8720 Ethernet PHY with RMII interface, QFN-24 |
| U10,U11 | MCP2562-E-SN | |
| U14 | AP3445LW6-7 | |
| U15 | RTL8111H-CG-RH | |
| U16 | RT9742SNGV | |
| U17 | SL2.1A | |
| C1-C8,C12,C13,C16,C23,C25,C26,C29,C36,C43,C45-C47,C54,C55,C61-C71,C76-C82,C85,C86,C89,C90,C93-C103 | 0.1uF | Unpolarized capacitor |
| C9,C11,C15,C44,C48,C49,C56-C59 | 0.1μF | Capacitor 100n 0603 |
| C10,C40,C72-C75,C83,C88 | 10u | |
| C14,C27,C28,C38 | 0.01uF | Unpolarized capacitor |
| C17,C60,C104,C105 | 100n | |
| C18,C31,C42 | 100uF | Unpolarized capacitor |
| C19-C22,C32-C35 | 22uF | Unpolarized capacitor |
| C24,C30,C37,C39 | 10μF | Unpolarized capacitor |
| C41,C50 | 1μF | Capacitor 1u 0603 |
| C51 | 470p | Capacitor 420p 0603 |
| C52,C53,C84,C92 | 15pF | Unpolarized capacitor |
| C87 | 1uF | |
| C91 | 22pF | |
| C106-C108 | 0.1u | |
| D1,D10,D11 | LED Green | |
| D2 | LED Red | |
| D3 | WS2812B | RGB LED with integrated controller |
| D4-D9 | LED | |
| D12,D13 | H5VU25U | 4-Channel Low Capacitance TVS Diode Array, DFN-10 |
| FB1,FB2 | FerriteBead | Ferrite bead |
| J1 | Conn_02x07_Odd_Even | |
| J2 | Bus_M.2_Socket_M | M.2 Socket 3 Mechanical Key M |
| J3,J4 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J5 | THD-20-R | |
| J6 | JST_SHBM04B-SRSS-TB | |
| J7 | Bus_M.2_Socket_E | M.2 Socket 1-SD Mechanical Key E |
| J8 | USB_A_Stacked | USB Type A connector, stacked |
| J9 | Barrel_Jack | |
| J10 | RJMG201K21120FR | |
| J11 | 690-019-298-412 | |
| J12 | USB3_A | |
| J13 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J14 | Micro_SD_Card_Det | |
| J15 | Conn_01x22_Female | |
| L1 | 6.8 | Inductor |
| L2 | 6.8uH | Inductor |
| L3 | 2.2uH | |
| R1-R6,R35-R37 | 1k | |
| R7 | 15K 1% | |
| R8,R9,R41,R42,R50,R51 | 100kΩ | Resistor |
| R10 | 47kΩ | |
| R11 | 1kΩ | |
| R12,R13 | 5.1kΩ | |
| R14,R21,R26,R33 | 10KΩ | Resistor 10K 0603 |
| R15,R18,R29,R32 | 33Ω | Resistor,Resistor 10K 0603 |
| R16,R22,R34,R40,R55,R56 | 10kΩ | Resistor |
| R17 | 1.5KΩ | Resistor 10K 0603 |
| R19,R23,R25,R28 | 49.9Ω | Resistor |
| R20,R24 | 200 | |
| R27 | 10k | |
| R30,R31 | 120Ω | |
| R38 | 100k | |
| R39 | 31.6kΩ | Resistor |
| R43,R49,R53 | 12.1K | |
| R44,R48 | 4.7K | |
| R45-R47 | 4.7kΩ | |
| R52 | 2.49kΩ | |
| R54 | 51.2kΩ | Resistor |
| R57,R58 | 470R | |
| SW1 | Right angle Tact button | Push button switch, generic, two pins |
| SW2 | SW_Push | |
| SW3 | SW_DIP_x04 | 4x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| TP1-TP3 | TestPoint | |
| Y1 | 16Mhz | |
| Y2,Y3 | 25Mhz | Four pin crystal, GND on pins 2 and 4 |
| Y4 | 12Mhz |