BluetoothMicroPCB
mfrisch3
Components (22)
| Reference | Value | Description |
|---|---|---|
| U1 | STM32WB55CEUx | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 256KB RAM, 64 MHz, 1.71-3.6V, 30 GPIO, UFQFPN48 |
| U2,U4 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U3 | MIC5365-3.3YD5 | 150mA Low-dropout Voltage Regulator, Vout 3.3V, Vin up to 5.5V, SOT-23-5 |
| C1-C6,C9,C10,C16,C17 | 100n | Unpolarized capacitor |
| C7,C8,C11,C18,C19 | 4u7 | Unpolarized capacitor |
| C12,C13 | 10pF | Unpolarized capacitor |
| C14 | 0p8 | Unpolarized capacitor |
| C15 | 0p3 | Unpolarized capacitor |
| D1,D2 | LED | Light emitting diode |
| FLT1 | DLF162500LT-5028A1 | |
| J2 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J3 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J4 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| L1 | 10n | Inductor |
| L2 | 10u | Inductor |
| L3 | 2n7 | Inductor |
| R1,R3,R4 | 5k1 | Resistor |
| R2,R5 | 220R | Resistor |
| R6 | R | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| X1 | 32kHz | Two pin crystal |
| X2 | 32MHz | Four pin crystal, GND on pins 2 and 4 |