mbed-ce-ci-shield-v2
mbed-ce
New version of the Mbed OS CE CI Shield -- a shield containing a logic analyzer and components to test features like I2C, SPI, and PWM.
Components (50)
| Reference | Value | Description |
|---|---|---|
| U1 | CY7C68013A-56PVX | CYPRESS FX2LP USB Microcontroller, 48MHz 8051, 16KB RAM, USB 2.0, I2C, SSOP-56 |
| U2 | CY7C65632-48AXCT | 4 Port USB Hub Controller USB 2.0 48-TQFP |
| U3-U5,U8 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U6,U7 | BD2221G-LBTR | Current Limit IC 0.5-1.0A, SOT-23-5 |
| U9 | LD1117S33TR | 800mA Fixed Low Drop Positive Voltage Regulator, Fixed Output 3.3V, SOT-223 |
| U10 | CY7C65211A | Full Speed USB to Serial (UART/SPI/I2C) Bridge, 3MHz Max Speed, With GPIOs, 24-QFN |
| U11,U12 | SN74CB3Q3253PWR | CMOS DPQT analog multiplexer/demultiplexer, TSSOP-16 |
| U13 | ADG733BRU | Triple SPDT CMOS Analog Switch, 2.5Ohm Ron, TSSOP-16 |
| U14 | 74AHC1G04 | Single NOT Gate, Low-Voltage CMOS |
| U15,U16 | 24FC64-I/SN | I2C Serial EEPROM, 2Kb, DIP-8/SOIC-8/TSSOP-8/DFN-8 |
| U17 | MCP2515-xST | Stand-Alone CAN Controller with SPI Interface, TSSOP-20 |
| U18,U19 | TJA1051T-3 | High-Speed CAN Transceiver, separate VIO, silent mode, SOIC-8 |
| U20 | 74LVC1G80 | Single D Flip-Flop, Inverted Output, Low-Voltage CMOS |
| U21 | SN74AXC4T774 | 4 Channel Bidirectional Level Shifter with Selectable Direction, TSSOP-16 |
| U22 | AP22913W6-7 | Load Switch w/ Discharge Resistor |
| C1,C3,C4,C6,C7,C10,C11,C16,C23,C24,C32,C35,C38,C39,C41,C44-C51 | 100nF | Unpolarized capacitor, small symbol |
| C2,C5,C8,C9,C12,C13,C19,C21,C27,C33,C34 | 2.2uF | Unpolarized capacitor, small symbol |
| C14,C15,C22,C25,C26,C28-C31,C36,C40,C42 | 1u | Unpolarized capacitor, small symbol |
| C17,C37,C43 | 10u | Unpolarized capacitor, small symbol |
| C18,C20 | 100u | Polarized capacitor, US symbol |
| D1,D2 | AA3528CGSK | Green LED 100mcd 20mA Vf=2.1V |
| D3,D4 | AA3528SYSK | Yellow LED 200mcd 20mA Vf=2V |
| D5,D6 | AA3528SURSK | Red LED 100mcd 20mA Vf=1.95V |
| D7,D8 | BAT54W | Schottky barrier diode, SOT-323 |
| FB1-FB7 | 300@100MHz | Ferrite bead, small symbol |
| J1,J3 | USB4105-GF-A | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | UJ2-ADH-3-TH | USB Type A connector, stacked |
| J4,J5 | 1x8 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | 1x6 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | 1x10 | Generic connector, single row, 01x10, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | DM3AT | Micro SD Card Socket with card detection pins |
| J9-J11 | 1x2 | Generic connector, single row, 01x02, script generated |
| M1,M2 | QPC02SXGN-RC | 0.1" Jumper / Shunt |
| R1 | 649 | Resistor, US symbol |
| R2,R3,R11,R12 | 5.1k | Resistor, US symbol |
| R4-R10,R16,R40 | 100k | Resistor, US symbol |
| R13 | 9.1k | Resistor, US symbol |
| R14,R25 | 4.7k | Resistor, US symbol |
| R15,R22-R24,R26,R31,R35,R36,R39,R42,R43,R45,R56-R61,R63,R64 | 10k | Resistor, US symbol |
| R17,R18 | 270 | Resistor, US symbol |
| R19-R21 | 300 | Resistor, US symbol |
| R27,R28,R30,R62 | 1k | Resistor, US symbol |
| R29 | 1.5k | Resistor, US symbol |
| R32,R44 | 120 | Resistor, US symbol |
| R33,R34 | 1.1k | Resistor, US symbol |
| R37,R38 | 2.2k | Resistor, US symbol |
| R41 | 820 | Resistor, US symbol |
| R46-R51,R54,R55 | 1 | Resistor, US symbol |
| R52,R53 | 33 | Resistor, US symbol |
| X1 | 24.000MHz | 3.3V HCMOS SMD Crystal Clock Oscillator, Abracon |