Loading design…
marstmu
| Reference | Value | Description |
|---|---|---|
| Q1 | IRLML6244 | 6.3A Id, 20V Vds, 21mOhm Rds, N-Channel StrongIRFET Power MOSFET, SOT-23 |
| Q2 | DMG3415U | -3A Id, -20V Vds, P-Channel MOSFET, SOT-23 |
| U1 | MS5611-01BA | Barometric pressure sensor, 10cm resolution, 10 to 1200 mbar, I2C and SPI interface up to 20MHz, LGA-8 |
| U2 | MPU-6050 | InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C |
| U4 | ESP32-S3-WROOM-1-N8 | |
| U5 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| C1,C8,C10 | 10uF | Unpolarized capacitor |
| C2,C5,C7,C9 | 0.1uF | Unpolarized capacitor |
| C3 | 1uF | Unpolarized capacitor |
| C4 | 10nF | Unpolarized capacitor |
| C6 | 2.2nF | Unpolarized capacitor |
| CR1 | MBRS130LT3G | |
| D1,D2 | LED | Light emitting diode |
| J3 | B2B-PH-K-S | |
| J4 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| LS1 | HNB09A03 | |
| R1,R4 | 1k | Resistor |
| R2,R3 | 4.7k | Resistor |
| R5,R8,R9 | 100k | Resistor |
| R6,R12 | 5.1k | Resistor |
| R7 | 2k | Resistor |
| R11 | 10k | Resistor |
| R16,R17 | 27 | |
| SW1 | RESET | Single Pole Single Throw (SPST) switch |
| SW2 | BOOT | Single Pole Single Throw (SPST) switch |