Loading design…
markantosa
[SUTD 30.007] Embolisation agent characterisation and automated mixing system
| Reference | Value | Description |
|---|---|---|
| IC1,IC2 | OPA2354 | Automotive 250MHz, Rail-to-Rail I/O, CMOS Dual Operational Amplifier |
| Q1 | AO4407A | P-Channel 30 V 12A (Ta) 3.1W (Ta) Surface Mount 8-SOIC |
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | LM2596S-5 | 5V 3A Step-Down Voltage Regulator, TO-263 |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| CdecAD_C1,CdecES_C1,CdecO1_C1,CdecO2_C1,CdecT1_C1,CdecT2_C1,CinAC_C1,Clim1_C1,Clim2_C1,CouAC_C1,CouAC_C2,CouBU_C1,CouLD_C1,CpreAC_C1,C_adc1,C_BOOT1,C_inBU_C1 | 100nF X7R | Unpolarized capacitor |
| CdecAD_C8,CdecES_C8,CdecO1_C8,CdecO2_C8 | 10µF X5R 0805 | Unpolarized capacitor |
| CdecT1_E1,CdecT2_E1 | 100µF 35V electrolytic radial | Polarized capacitor |
| CinLD_T1,CouLD_T1 | 10µF 10V tantalum Case A | Polarized capacitor |
| CouBU_E1 |
| 220µF 10V low-ESR electrolytic radial |
| Polarized capacitor |
| Csnub1 | 1nF X7R | Unpolarized capacitor |
|---|
| C_EN1 | 1µF X7R | Unpolarized capacitor |
|---|
| C_envRC1 | 10nF X7R | Unpolarized capacitor |
|---|
| C_inBU_E1 | 100 µF 50 V radial | Polarized capacitor |
|---|
| Dcatch1 | SS34A | Schottky diode |
|---|
| Dclamp1 | SMBJ28A | Zener diode |
|---|
| Denv1 | BAT54 | Schottky diode |
|---|
| Dprot1 | BZX84C15, 15 V Zener, SOT-23 | 300mW Zener Diode, SOT-23 |
|---|
| Drx1,Drx2 | BAV99 | BAV99 High-speed switching diodes, SOT-23 |
|---|
| Dusb1 | 1N5819 | 40V 1A Schottky Barrier Rectifier Diode, DO-41 |
|---|
| F2 | 5A littlefuse | Resettable fuse, polymeric positive temperature coefficient |
|---|
| J1,J2 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
|---|
| J3,JMP_MS1_T1,JMP_MS1_T2,JMP_MS2_T1,JMP_MS2_T2,JMP_PDN_T1,JMP_PDN_T2 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4,J5,J15_1,J15_2,SK4,SK5 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | motor 1 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J7 | motor 2 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J8 | 5V out | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J9 | Conn_02x10_Odd_Even | Generic connector, double row, 02x10, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J13 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J14 | 24 V PSU input | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J16 | 3.3V out | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| Jdo_TMC1_extra1,Jdo_TMC1_extra2,Jdo_TMC2_extra1,Jdo_TMC2_extra2,JGPIO45,Jup_TMC1_extra1,Jup_TMC1_extra2,Jup_TMC2_extra1,Jup_TMC2_extra2 | Conn_01x01 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J_AD9833 | Conn_01x07 | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J_extra_T1_fem1,J_extra_T1_mal1,J_extra_T2_fem1,J_extra_T2_mal1 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| Lbuck1 | 100µH | Inductor |
|---|
| LED_pwr1 | LED_pwr | Light emitting diode |
|---|
| LED_stat1 | green LED | Light emitting diode |
|---|
| RbiasO1_1,RbiasO1_2,RbiasO2_1-RbiasO2_4,Rsnub1,R_BOOT1,R_EN1-R_EN3,R_envRC1,R_gate1,R_LEDpw1,R_M1S1,R_M1S2,R_M2S1,R_M2S2,R_PDN_UP1 | 10kΩ 0402 | Resistor |
|---|
| Rbleed1 | 4.7kΩ | Resistor |
|---|
| RfO1_1 | 390Ω | Resistor |
|---|
| RfO2_A1,RfO2_B1 | 910Ω | Resistor |
|---|
| RgO1_1,RgO2_A1,RgO2_B1 | 100Ω | Resistor |
|---|
| R_cc1,R_cc2 | 5.1kΩ | Resistor |
|---|
| R_in1 | 100Ω 0402 | Resistor |
|---|
| R_statLED1 | 330Ω | Resistor |
|---|
| R_TL1 | 47Ω | Resistor |
|---|
| R_UART1 | 1kΩ 0402 | Resistor |
|---|
| SK1_T1,SK1_T2,SK2_T1,SK2_T2 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| SW_boot1,SW_reset1 | 6×6mm tactile | Push button switch, generic, two pins |
|---|