Loading design…
loganrf
| Reference | Value | Description |
|---|---|---|
| Module1 | ComputeModule5-CM5 | RaspberryPi Compute module 5 |
| U1 | RT9742GGJ5 | 1A load switch |
| U2 | AT24CS64-MAHM | I2C Serial EEPROM, 64Kb (8192x8) with Unique Serial Number, UDFN8 |
| U4,U7,U9 | LM74700QDBVRQ1 | |
| U5,U6,U8 | CSD18511Q5A | |
| U10 | BMI270 | |
| U11,U12,U16 | 74LVC2T45DC | Dual supply translating transceiver, 3-state, 2-bit, VSSOP-8 |
| U13,U14 | TLVM13630RDHR | |
| U15 | AK09918C | |
| U17 | RT9742SNGV | 500mA Load Switch |
| U18 | PCA9685PW | 16-channel 12-bit PWM Fm+ I2C-bus LED controller RGBA TSSOP |
| U20 | MMC5983MA | |
| U21 | MCP25625x-x-ML | Stand-Alone CAN Controller with SPI Interface and integated Transceiver, VQFN-28 |
| U22,U23 | WE-TVS-82400102 | Low Capacitance TVS Diode Array, 2 Channels, SOT-23-6 |
| U24 | TCA9517ADGK | Level-Translating I2C Bus Buffer/Repeater, VSSOP-8 |
| U25 | BMP390 | |
| C1,C2,C42-C51 | 6.8uF | capacitor, small US symbol |
| C3,C66,C67 | 10u | Unpolarized capacitor,capacitor, small US symbol |
| C4,C11,C14,C20,C22 | 47uF | capacitor, small US symbol |
| C5,C12,C15,C17,C18,C28,C30,C31,C33 | 4.7uF | capacitor, small US symbol |
| C6-C10,C13,C16,C19,C21,C23-C27,C34-C39,C54,C55,C57-C62,C64,C65 | 100nF | capacitor, US symbol,capacitor, small US symbol |
| C29,C32 | 1uF | capacitor, small US symbol |
| C40,C41 | 100n | Unpolarized capacitor |
| C52,C53 | 22pF | capacitor, small US symbol |
| C56 | 1000pF | capacitor, US symbol |
| C63 | 10uF | capacitor, small US symbol |
| C68 | 47pF | capacitor, small US symbol |
| D1,D2 | SMAJ26A | 400W unidirectional Transient Voltage Suppressor, 26.0Vr, SMA(DO-214AC) |
| D4 | LED Red | Light emitting diode |
| D5 | SZNUP2105L | Dual Line CAN Bus Protector, 24Vrwm, Automotive Grade |
| FB1,FB2 | FerriteBead_Small | Ferrite bead, small symbol |
| FL1 | Choke_CommonMode_FerriteCore_1234 | Generic common-mode choke, ferrite core, 1234 pin order |
| J1 | 1053101208 | |
| J2 | HDMI_A_1.4 | HDMI 1.4+ type A connector |
| J3,J5-J9,J11 | Conn_01x04_MountingPin | Generic connectable mounting pin connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4,J10,J16-J19 | Conn_01x06_MountingPin | Generic connectable mounting pin connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12,J13 | Conn_01x02_MountingPin | Generic connectable mounting pin connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J14 | Micro_SD_Card_Det | Micro SD Card Socket with two card detection pins |
| J15 | USB_C_Receptacle_USB2.0 | USB 2.0-only 16P Type-C Receptacle connector |
| R1,R2 | R_US | Resistor, US symbol |
| R4 | 10K 1% | Resistor |
| R5,R6,R12 | 2.2K 1% | Resistor |
| R7,R9 | 25.5k | Resistor, US symbol |
| R8,R11,R14-R17,R22-R24,R26 | 10k | Resistor, US symbol |
| R10,R13 | 53.6k | Resistor, US symbol |
| R19 | 1k | Resistor |
| R20,R21 | 75 | Resistor, US symbol |
| R25 | 120 | Resistor, US symbol |
| RN1-RN4 | R_Pack04 | 4 resistor network, parallel topology |
| TR1 | TG110-E050N5xx | Ethernet LAN 10/100 Base-Tx Transformer |
| Y1 | Crystal_GND24_Small | Four pin crystal, GND on pins 2 and 4, small symbol |