VCAT-TelemetryLeaderInterfacePCB
lhr-solar
acquiring data ...
Components (50)
| Reference | Value | Description |
|---|---|---|
| IC1,IC2 | TCAN337DCNR | High-Speed CAN Transceiver, 1Mbps, 3.3V supply, silent mode, fault output, SOT-23-8/SOIC-8 |
| U1 | ASM330LHHTR | IMU Sensor |
| U7,U8 | CDSOT23-T24CAN | CAN Bus Protector |
| U9 | PA1616S_GPS | |
| U10 | TPS54560BDDA | 5A, Step Down DC-DC Converter, 4.5-60V Input Voltage, Texas R-PDSO-G8 |
| BAT1 | ML414 | |
| BT1 | Battery | Single-cell battery |
| C1,C4 | 100nf | Unpolarized capacitor 100nf |
| C3 | 10uf | Unpolarized capacitor 10uf |
| C6 | 470 uF | Unpolarized capacitor |
| C23,C25 | 0.1uF | Unpolarized capacitor |
| C24,C26 | 1uF | Unpolarized capacitor |
| C27-C29 | 1u | Unpolarized capacitor |
| C30 | 100n | Unpolarized capacitor |
| C40 | 10uF | Unpolarized capacitor |
| C44 | 47uF | Polarized capacitor, US symbol |
| CC_FLT1,CC_FLT2 | LED | Light emitting diode |
| C_BOOT1 | 100nF | Unpolarized capacitor |
| C_COMP1 | 560pF | Unpolarized capacitor |
| C_COMP2 | 6.8pF | Unpolarized capacitor |
| D5 | 3V3 | Light emitting diode |
| D6 | PFLT | Light emitting diode |
| D7 | 5V | Light emitting diode |
| D8 | !3D_FX | Light emitting diode |
| D12 | 550mV | Schottky Barrier Diode Array, SOT-363 |
| F1 | +4A | Fuse |
| F2 | +5A | Fuse |
| FB1 | FerriteBead | Ferrite bead |
| J3 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J4 | Conn_02x06_Counter_Clockwise | Generic connector, double row, 02x06, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Conn_02x07_Vertical | Generic connector, double row, 02x07, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | To The Zedboard | Generic connector, double row, 02x06, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | Conn_02x06_Odd_Even | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | Conn_02x05_Counter_Clockwise | Generic connector, double row, 02x05, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | Conn_02x02_Odd_Even | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | GPS_I2C | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | GPS_BAT | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J14 | Barrel_Jack_Switch | DC Barrel Jack with an internal switch |
| L2 | 8.2uH | Inductor |
| R10,R13,R25 | 10k | NRSET Pull Up,Resistor |
| R11,R23 | 2.2k | Resistor |
| R12,R19,R22 | 120 | Resistor |
| R20 | 4.3k | Resistor |
| R21 | 768 | Resistor |
| R24,R26 | 1k | NRSET Pull Up |
| R_COMP1 | 44.2k | Resistor, US symbol |
| R_FBB1 | 10.5k | Resistor, US symbol |
| R_FBT1 | 147k | Resistor, US symbol |
| R_t1 | 105k | Resistor, US symbol |
| SW4 | GPS_RESET | Push button switch, generic, two pins |