skateboard-f25
leogmendoza
Building an electric skateboard!💨
Components (42)
| Reference | Value | Description |
|---|---|---|
| Q1 | 60Vds | P-MOSFET transistor, gate/drain/source |
| U1 | LMR51635XFDDCR | |
| U2 | ESP32-WROOM-32 | RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U3 | AP63203WU-7 | |
| 3V3 | 3V3 | test point |
| 12V1 | 12V | test point |
| C1,C3,C7 | 47uF | Polarized capacitor, US symbol |
| C2,C4-C6,C12,C13,C17,C21,C24 | 0.1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C9,C15,C16,C22,C23 | 22uF | Polarized capacitor, US symbol,Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C10,C11 | 2.2uF | Unpolarized capacitor |
| C14,C20 | 10uF | Unpolarized capacitor |
| D1 | 51Vrwm | |
| D2 | 15Vz | Zener diode |
| D3,D8 | 2Vf | Light emitting diode |
| D4 | 12Vrwm | |
| D5,D6 | LED | Light emitting diode |
| D9 | 3.3Vrwm | |
| EN_3V3 | EN_3V3 | test point |
| EN_12V1 | EN_12V | test point |
| F1 | 3.5A 63V | Fuse |
| F2,F4,F6 | 0.5A 16V | Resettable fuse, polymeric positive temperature coefficient |
| FB_3V3 | FB_3V3 | test point |
| FB_12V1 | FB_12V | test point |
| GND1 | GND | test point |
| J1 | XT30-M_Ver | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2,J5 | JST-PH_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J6,J7 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 51uH | |
| L3 | 3.9uH | Inductor |
| R1,R7 | 100k | Resistor, US symbol |
| R2 | 4.7k | Resistor, US symbol |
| R3,R8 | 10k | Resistor, US symbol |
| R4 | 680 | Resistor, US symbol |
| R5 | 143k | Resistor, US symbol |
| R6 | 10.2k | Resistor, US symbol |
| R9,R10 | 1k | Resistor, US symbol |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| SW_3V3 | SW_3V3 | test point |
| SW_12V1 | SW_12V | test point |
| VBAT1 | VBAT | test point |