euro-rack-synth
lennartquerter
Lenimal Github for DIY for a Eurorack Synth
Components (27)
| Reference | Value | Description |
|---|---|---|
| Q1 | MMBT3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, SOT-23 |
| U1 | 3x7-segment_display | Double digit 7 segment green LED common cathode |
| U2 | 74HC595 | 8-bit serial in/out Shift Register 3-State Outputs |
| U3 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14 |
| A1 | Arduino_Nano_v3.x | Arduino Nano v3.x |
| C1,C5 | 47uF | Polarized capacitor |
| C2-C4,C6,C7,C9,C10 | 100nF | Unpolarized capacitor |
| C8 | 10uF | Unpolarized capacitor |
| D1-D4 | LED | Light emitting diode |
| D5,D6 | 1N5819WS | 40V 600mV@1A 1A SOD-323 Schottky Barrier Diodes, SOD-323 |
| H1 | Conn_02x05_PWR_Eurorack | |
| J1 | CLK_OUT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J2 | x2_OUT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J3 | x4_OUT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J4 | x8_OUT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |