euro-rack-synth
lennartquerter
Lenimal Github for DIY for a Eurorack Synth
Components (25)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | BC548 | 0.1A Ic, 30V Vce, Small Signal NPN Transistor, TO-92 |
| U1,U2 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14 |
| C1 | 10pf | Unpolarized capacitor |
| C2-C5,C9,C10 | 0.1uF | Polarized capacitor,Unpolarized capacitor |
| C6,C12 | 100 nF | Unpolarized capacitor |
| C7,C8 | 47uF | Polarized capacitor |
| C11 | 10pF | Unpolarized capacitor |
| D1,D5 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D2,D6 | LED | Light emitting diode |
| D3,D4 | 1N5819 | 40V 1A Schottky Barrier Rectifier Diode, DO-41 |
| H1,H4 | PinHeader_1x08 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| H2,H5 | PinSocket_1x08 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| H3 | Conn_02x05_PWR_Eurorack | |
| INPUT_A1,INPUT_B1 | INPUT_1 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| INPUT_A2,INPUT_B2 | INPUT_2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| OUTPUT_A1,OUTPUT_B1 | OUTPUT_1 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| OUTPUT_A2,OUTPUT_B2 | OUTPUT_2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| OUTPUT_A3,OUTPUT_B3 | OUTPUT_3 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| R1-R4,R18-R21 | 100K [0.1%] | Resistor |
| R5-R10,R22-R27 | 10K [0.1%] | Resistor |