euro-rack-synth
lennartquerter
Lenimal Github for DIY for a Eurorack Synth
Components (20)
| Reference | Value | Description |
|---|---|---|
| U1,U2 | STM32H7B0VBTx | STMicroelectronics Arm Cortex-M7 MCU, 128KB flash, 1184KB RAM, 280 MHz, 1.62-3.6V, 82 GPIO, LQFP100 |
| C1,C2 | 47uF | Polarized capacitor |
| C3,C4,C10-C14,C16,C17,C19,C22,C27,C29-C31,C33,C34,C37-C44 | 100nF | Unpolarized capacitor |
| C15 | 4.7uF | |
| C18,C32 | 1uF | Unpolarized capacitor |
| C20,C21,C28,C36 | 2.2uF | Unpolarized capacitor |
| C23,C24 | 18pF | |
| C25,C26 | 20pF | Unpolarized capacitor |
| C35 | 10uF | Unpolarized capacitor |
| D1,D2 | 1N5819WS | 40V 600mV@1A 1A SOD-323 Schottky Barrier Diodes, SOD-323 |
| H1 | POWER_CONN | |
| J7 | BOOT_RUN | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | RX/TX | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | SWD | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | I2C2 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R2,R3 | 10R | Resistor |
| R4-R7,R14-R18 | 10K | Resistor |
| R10 | 10k | |
| R13 | 100R | Resistor |
| Y1 | 20MHZ | Two pin crystal |