euro-rack-synth
lennartquerter
Lenimal Github for DIY for a Eurorack Synth
Components (27)
| Reference | Value | Description |
|---|---|---|
| Q1 | BC548 | 0.1A Ic, 30V Vce, Small Signal NPN Transistor, TO-92 |
| U1,U2 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14 |
| ATT1,SUS/REL1 | A1M | Potentiometer |
| C1-C4,C7,C8 | 0.1uF | Polarized capacitor,Unpolarized capacitor |
| C5,C6 | 47uF | Polarized capacitor |
| C9,C9_OPT1,C10 | 1uF | Unpolarized capacitor |
| D1,D2 | 1N5819 | 40V 1A Schottky Barrier Rectifier Diode, DO-41 |
| D3,D4,D6-D9 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D5 | LED | Light emitting diode |
| H1,H4,H6,H7 | PinHeader_1x04 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| H1 | TOP_IN | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| H2 | BTM_IN | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| H2,H3,H5,H8 | PinSocket_1x04 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J1 | PWR | |
| J2 | OUT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J3 | GATE | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J4 | INV_OUT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J5 | PinHeader_1x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 100R | Resistor |
| R2,R3 | 10R |