Loading design…
kyrg4z
Learning physics, network security, and communication protocols sparked my interest with radio systems and wireless communications.
| Reference | Value | Description |
|---|---|---|
| U1 | HT-CT62 | LoRa/LoRaWAN node module with ESP32-C3 and SX1262 |
| U2 | SAM-M10Q | GPS ublox M8 variant |
| U3 | ER_OLEDM0.91_1x-I2C | SSD1306 OLED module, 0.91 inch, 128x32, I2C |
| U4 | TPS63001 | Buck-Boost Converter, 1.8-5.5V Input Voltage, 1.7A Switch Current, 3.3V Output Voltage, VSON-10 |
| U5 | TPS22917DBV | 1V to 5.5V, 2A, 80mΩ Ultra-Low Leakage Load Switch, SOT23-6 |
| U6 | BQ24074RGT | USB-Friendly Li-Ion Battery Charger and Power-Path Management, VQFN-16 |
| C1,C17 | 1uF | Unpolarized capacitor |
| C2,C3,C5,C7,C10,C12,C15 | 10uF | Unpolarized capacitor |
| C6 | 10uf | Unpolarized capacitor |
|---|
| C8 | 0.1uF | Unpolarized capacitor |
|---|
| C9,C11,C16,C18 | 100nF | Unpolarized capacitor |
|---|
| C13 | 2.2uF | Unpolarized capacitor |
|---|
| C14 | 1nF | Unpolarized capacitor |
|---|
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J2 | 18650_PROTECTED | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| L1 | 2.2uH | Inductor |
|---|
| NTC?,R10,R11 | 10k | Resistor,Temperature dependent resistor, negative temperature coefficient |
|---|
| R1,R2 | 5.1k | Resistor |
|---|
| R3,R4 | 22 | Resistor |
|---|
| R5 | 100 | Resistor |
|---|
| R6 | 3k | Resistor |
|---|
| R7 | 3.09k | Resistor |
|---|
| R8,R9 | 4.7k | Resistor |
|---|
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
|---|