board-gpio
kt-21
GTSR GPIO Board
Components (40)
| Reference | Value | Description |
|---|---|---|
| Q5-Q8 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| U1 | ADM3058EBRIZ | |
| U2,U9,U10 | TL072 | Dual Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8 |
| U8 | STM32G474RETx | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 170 MHz, 1.71-3.6V, 52 GPIO, LQFP64 |
| C1,C2 | 0.1u | |
| C3,C4,C6,C8-C10,C15,C16,C19-C22,C39-C54 | 68 nF | Unpolarized capacitor |
| C5,C12,C17 | 100nF | Unpolarized capacitor |
| C7,C11,C32 | 640 nF | Unpolarized capacitor |
| C14,C29 | 0.1uF | Unpolarized capacitor |
| C18,C23-C25,C28,C30,C31,C37,C38 | 10uF | Unpolarized capacitor |
| C26,C27 | 2.2uF | |
| D1-D4 | D_TVS | |
| D9-D11,D14-D16,D27-D33,D36 | MMBZ27VALT1 | |
| D12 | ESD12VD3B | |
| D13 | Green | |
| D19,D26,D34,D35 | LED | Light emitting diode |
| D20,D22,D24 | D_Schottky | Schottky diode |
| D21,D23,D25 | 3.3V Zener | Zener diode |
| DC1 | NCS3S1205SC | |
| DC2 | R-78C5.0-1.0 | |
| DC3 | LM3671 | |
| I2C1,SPI1 | MICRO-FIT_3.0_6POS_2ROW | |
| J1,J6 | RJ45_Shielded | RJ connector, 8P8C (8 positions 8 connected), Shielded |
| J2,J7-J10,J12-J15 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
| J3-J5,J21 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| J11 | Tag-Connect | |
| J16-J20 | Conn_01x08_Socket | Generic connector, single row, 01x08, script generated |
| L1 | 2.2UH | |
| R1,R16 | 120 | |
| R2-R5,R60-R68,R71 | R_US | Resistor, US symbol |
| R6,R7,R34,R36,R38,R39 | 10k | Resistor, US symbol |
| R8,R9 | 0 | |
| R10-R15,R33,R41-R59,R69,R70 | 470 | Resistor, US symbol |
| R17-R22,R26,R31 | 150 ohms | |
| R23,R25,R30,R32 | 100 ohms | Resistor, US symbol |
| R24 | 6.6 ohm | Resistor, US symbol |
| R27-R29 | 500 ohms | Resistor, US symbol |
| R35,R37,R40 | 6.6 ohms | Resistor, US symbol |
| SW1 | DS04-254-1L-03BK | |
| SW4 | SW_Push | Push button switch, generic, two pins |