| Q1 | Q_NMOS | N-MOSFET transistor |
|---|
| U2 | RP2350_80QFN | |
|---|
| U3 | NCP1117-3.3_SOT223 | |
|---|
| U4 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
|---|
| C1,C5,C24,C25 | 4.7u | |
|---|
| C2,C22 | 10u | |
|---|
| C3,C8,C10,C12 | 100 nF | Unpolarized capacitor |
|---|
| C4 | 1000 uF | Polarized capacitor |
|---|
| C6,C13 | 10 uF | |
|---|
| C7,C9,C11 | 100 uF | Unpolarized capacitor |
|---|
| C23,C26-C35 | 100n | |
|---|
| C36,C37 | 15p | |
|---|
| D1 | 1N4728A | 1300mW Silicon planar power Zener diodes, DO-41 |
|---|
| D2,D3 | LED | Light emitting diode |
|---|
| J1 | SM03B-SRSS-TB | |
|---|
| J2 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
|---|
| J3 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J7-J10,J17 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
|---|
| J11 | SM04B-SRSS-TB_LF__SN_ | |
|---|
| J12-J15 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
|---|
| J16 | Conn_01x10_Pin | Generic connector, single row, 01x10, script generated |
|---|
| J18 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
|---|
| L2 | 3.3u | |
|---|
| R1,R11,R14 | 1k | |
|---|
| R2,R3 | 10k | Resistor |
|---|
| R5 | 33 | |
|---|
| R9,R10 | 5.1k | Resistor |
|---|
| R12,R13 | 27 | |
|---|
| SW1-SW4 | SW_Push | Push button switch, generic, two pins |
|---|
| TP1,TP2 | TestPoint | test point |
|---|
| Y2 | ABM8-272-T3 | |
|---|
