GigaESC
kaminaris
Components (43)
| Reference | Value | Description |
|---|---|---|
| Q1-Q4 | AON7418 | 60A Id, 25V Vds, NexFET N-Channel Power MOSFET, 3.4mOhm Ron, Qg Typ 6.2nC, VSON-8 3.3x3.3mm |
| Q5,Q6 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U3 | AMS1117-3.3 | |
| U4 | TPS5430DDAR | |
| U5 | TPS3823 | 150-nA, Ultralow Power, Supply Voltage Monitor, X2SON-4 |
| U6 | TJA1050T/CM,118 | High-Speed CAN Transceiver, separate VIO, silent mode, SOIC-8 |
| U7 | TLV2372 | Dual Rail-to-Rail Input/Output Operational Amplifier, DIP-8/SOIC-8/VSSOP-8 |
| U8-U13 | PC817B | Optocoupler, Phototransistor Output, 5300 VRMS, VCEO 70V, CTR% 63-125, -55 to +110 degree Celsius, UL, BSI, FIMKO, SMD PDIP-4 |
| C1,C3,C16,C17,C21-C23 | 100n | |
| C2,C19,C20 | 10u | |
| C4-C6,C10 | 22u 25V | |
| C7 | 10n | |
| C8,C9 | 100uF 10V Tant | |
| C18 | 2.2u | |
| C24,C26 | 1u | |
| D1,D3,D4,D7,D8,D11,D14 | ESD9B3.3ST5G | ESD protection diode, 3.3Vrwm, SOD-923 |
| D2 | SS34 | |
| D9,D10,D12,D13 | 1N5819WS | |
| J1 | Conn_ARM_JTAG_SWD_10 | Cortex Debug Connector, standard ARM Cortex-M SWD and JTAG interface |
| J3 | USBC Socket | USB 2.0-only 16P Type-C Receptacle connector |
| J8 | HCCPHPE24BKA90F | Automotive Connectors 24 WAY PIN HEADER |
| L1 | 15uH | |
| R1,R10,R11,R26-R31 | 4.7k | |
| R3,R4 | 5.1k | |
| R5,R6 | 22 | |
| R7,R17,R19,R21,R23 | 10k | |
| R8 | 3.3k | |
| R9 | 120 | |
| R12,R13,R24,R25 | 1k | |
| R14,R15 | 2.7k | |
| R16,R18,R20,R22 | 390 | |
| SW1 | BOOT | |
| SW2 | RESET | |
| TP1 | IO1 | test point |
| TP2 | IO2 | test point |
| TP3 | eFuse | test point |
| TP5 | IO38 | test point |
| TP6 | VDD_SPI | test point |
| TP7 | ROM | test point |
| TP8 | IO47 | test point |
| TP9 | IO48 | test point |