SandyLP
jpskenn
Low profile version of Sandy keyboard.
Components (29)
| Reference | Value | Description |
|---|---|---|
| Q1 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | NCP1117-3.3_SOT223 | 1A Low drop-out regulator, Fixed Output 3.3V, SOT-223 |
| U2 | RP2040 | A microcontroller by Raspberry Pi |
| U3 | W25Q128JVPIQ | 128Mb Serial Flash Memory, Standard/Dual/Quad SPI, SOIC-8 |
| C1,C2 | 10u | |
| C3-C12,C14,C15,C18-C21 | 100n | |
| C13,C16,C17 | 2.2uF | |
| D1-D35 | D | |
| D99 | PRTR5V0U2X | |
| F1 | Fuse | |
| H_btm_1-H_btm_11,H_mid_1-H_mid_18 | MountingHole | |
| J1 | Conn_01x10_Pin | Generic connector, single row, 01x10, script generated |
| J7 | USB_C_Receptacle_USB2.0 | USB 2.0-only 16P Type-C Receptacle connector |
| J8 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1-L6 | SK6812MINI-E | |
| LOGO1 | Logo_Base | |
| LS1,LS2 | Speaker | Speaker |
| R1,R2 | 5.1k | |
| R5,R8,R10-R14 | 1k | |
| R6,R7 | 27 | |
| R9 | 10k | |
| SD1 | Schottky diode | |
| STLED1 | LED_GREEN | |
| SW1 | BOOT | |
| SW2 | RESET | |
| SW_/1,SW_;1,SW_<1,SW_>1,SW_A1,SW_B1,SW_C1,SW_CTL1,SW_D1,SW_E1,SW_ENT1,SW_F1,SW_I1,SW_J1,SW_K1,SW_L1,SW_LALTu1,SW_LSPC1,SW_LWIN1,SW_M1,SW_N1,SW_O1,SW_R5CNT_L1,SW_R5CNT_R1,SW_RALT1,SW_RSPC1,SW_RWIN1,SW_S1,SW_V1,SW_W1,SW_X1,SW_Z1 | SW_Push | |
| SW_R5CNT_C1 | RotaryEncoder_Switch | |
| T_C0-T_C6,T_R0-T_R7 | Conn_01x01 | |
| Y1 | 12MHz |