Loading design…
jmh8231-Dev
Solid Propellant Motor Document
| Reference | Value | Description |
|---|---|---|
| Q3 | IRF1404 | |
| U1 | LM2596S-3.3 | 3.3V 3A Step-Down Voltage Regulator, TO-263 |
| U2 | 7.3728MHz | |
| U3 | INA219BxD | |
| U4 | STM32H723VGT6 | STMicroelectronics Arm Cortex-M7 MCU, 1024KB flash, 564KB RAM, 550 MHz, 1.71-3.6V, 82 GPIO, LQFP100 |
| U5 | 12MHz | |
| U6 | FT232RL |
| USB to Serial Interface, SSOP-28 |
| U7 | TVS |
|---|
| U10 | LT3045xMSE |
|---|
| U11 | ADS1262IPW |
|---|
| U12 | NCV8165 |
|---|
| U13 | ADUM4151 |
|---|
| U14 | OPA189 |
|---|
| U15,U16 | MCP6022 | Dual Operational Amplifiers, Rail-to-Rail Input/Output, DIP-8/SOIC-8/TSSOP-8 |
|---|
| U17 | TC427 |
|---|
| U18 | ADR4525D |
|---|
| BT1 | Main BAT | Multiple-cell battery |
|---|
| BT2 | IGN BAT | Multiple-cell battery |
|---|
| BZ1 | Buzzer |
|---|
| C1,C2,C5,C9,C10,C13,C16-C24,C29,C31-C33,C40,C41,C44,C45,C48,C49,C51,C53,C55,C57,C63,C73,C74,C78,C81,C85,C88,C99,C103,C106,C127 | 0.1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
|---|
| C3,C7,C11,C25,C26,C30,C39,C46,C70,C128 | 0.01uF | Unpolarized capacitor |
|---|
| C4,C8 | 470uF | Unpolarized capacitor |
|---|
| C6,C12,C27,C28,C38,C54,C61,C64,C102 | 10uF | Unpolarized capacitor |
|---|
| C14,C15 | 2.2uF | Unpolarized capacitor, small symbol |
|---|
| C34,C50 | 4.7uF |
|---|
| C42,C43 | 22pF |
|---|
| C47,C56,C58-C60,C62,C65,C75,C105 | 1uF | Unpolarized capacitor |
|---|
| C52 | 22uF |
|---|
| C72 | 4.7nF |
|---|
| C76,C77,C83,C84,C86,C87,C97,C98 | 47pF |
|---|
| C79,C80,C89-C92,C100,C101 | 1nF |
|---|
| D2 | SS54 | Schottky diode |
|---|
| D4 | Debug LED | Light emitting diode |
|---|
| D5 | Rx |
|---|
| D6 | Tx |
|---|
| D7 | Main Cell 1 | Light emitting diode |
|---|
| D8 | Main Cell 2 | Light emitting diode |
|---|
| D9 | IGN Cell 1 | Light emitting diode |
|---|
| D10 | IGN Cell 2 | Light emitting diode |
|---|
| D12 | 5VA | Light emitting diode |
|---|
| D13 | Digital 3.3V | Light emitting diode |
|---|
| D14 | 3.3VA | Light emitting diode |
|---|
| EEPROM1 | AT24C08C |
|---|
| FB1,FB3-FB5,FB7-FB9,FB12-FB17,FB19-FB22 | Bead | Ferrite bead, small symbol |
|---|
| FL1-FL4 | 10uH | EMI 2-inductor filter, pin-connections 1-4 and 2-3 |
|---|
| IGN1 | Igniter | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| IMU1 | BNO085 |
|---|
| J1 | ST-Link |
|---|
| J2 | LCD | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | USB Type C |
|---|
| J8 | Thrust | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J9 | ChamberTemp | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J10 | ChamberPressure | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J11 | Main Balance Jack |
|---|
| J12 | IGN Balance Jack |
|---|
| J13 | NozzleTemp | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| L2 | 33uH | Inductor |
|---|
| R1,R3 | 0 |
|---|
| R2 | 0.1 |
|---|
| R4,R15,R21-R23,R25-R27,R46,R47,R72 | 10k | Resistor, small symbol |
|---|
| R5-R9,R14 | 4.7k |
|---|
| R10,R12 | 5.1k |
|---|
| R11,R13 | 22 |
|---|
| R16,R18,R19,R50,R57-R60,R62-R65,R67 | 1k | Resistor,Resistor, small symbol |
|---|
| R17,R20,R28-R31,R40,R41 | 47 |
|---|
| R24 | 49.9k |
|---|
| R32,R35,R36,R39,R42,R45,R66,R68,R71 | 100 |
|---|
| R33,R34,R37,R38,R43,R44,R69,R70 | 10M |
|---|
| R48,R51,R53,R55 | 50k |
|---|
| R49,R52,R54,R56 | 100k |
|---|
| SW1 | IGN SW |
|---|
| SW2 | Main H7 Reset |
|---|
| Temp1 | AS6221 |
|---|
| Y2 | 32.768kHz | Four pin crystal, GND on pins 2 and 4 |
|---|