Apollo_7_Squale
jfdelnero
Apollo 7 Squale computer dev tools
Components (63)
| Reference | Value | Description |
|---|---|---|
| Q1-Q7 | 2N2222 | 800mA Ic, 40V Vce, NPN Transistor, TO-18 |
| U1 | MC6809 | 8-Bit Microprocessing unit 1.0MHz, DIP-40 |
| U2 | 27C32 | 5.0 V, 16 Kbit (2 Kb x 8) TIMEKEEPER® SRAM, DIP-24 |
| U3,U11,U30 | 74LS245 | Octal BUS Transceivers, 3-State outputs |
| U4 | 74LS139 | Dual Decoder 1 of 4, Active low outputs |
| U5 | 74LS20 | Dual 4-input NAND |
| U6 | 74LS08 | Quad And2 |
| U7,U29,U70 | 74LS02 | quad 2-input NOR gate |
| U8 | 74LS00 | quad 2-input NAND gate |
| U9,U12-U14,U31,U56 | 74LS541 | 8-bit Buffer/Line Driver 3-state outputs |
| U10 | 74LS138 | Decoder 3 to 8 active low outputs |
| U15,U71,U73,U74 | 74LS393 | Dual BCD 4-bit counter |
| U16-U23 | MK4164N | 65536 x 1 bit Dynamic RAM, 120/150ns access time, single 5V ±10% power supply, TTL compatible inputs, DIP-16 (Epoxy/Plastic package) |
| U24 | 74LS123 | Dual retriggerable Monostable |
| U25,U26 | 74LS74 | Dual D Flip-flop, Set & Reset |
| U28,U32,U60 | 74LS04 | Hex Inverter |
| U33 | 74LS17 | Hex Buffers and Drivers With Open Collector High Voltage Outputs |
| U34-U37 | 74LS166 | Shift Register 8-bit, parallel load |
| U38-U53 | MK4116N | 16384 x 1 bit Dynamic RAM, 150/200/250ns access time, VBB -5V, VCC 5V, VDD 12V, ±10% tolerance on all power supplies, TTL compatible inputs, DIP-16 (Epoxy/Plastic package) |
| U54,U55,U58,U64 | 74LS374 | 8-bit Register, 3-state outputs |
| U57,U63 | 74LS32 | Quad 2-input OR |
| U59 | EF9365 | Graphic Display Processor (GDP), DIP-40 |
| U61 | 74LS193 | Synchronous 4-bit Up/Down (2 clk) counter |
| U62 | TBP18S030N | 256 bits ROM |
| U65 | AY-3-8910A | Software-Controlled Sound Generator, DIP-40 |
| U66 | 74LS273 | 8-bit D Flip-Flop, reset |
| U67 | TL084 | Quad JFET-Input Operational Amplifiers, DIP-14/SOIC-14/SSOP-14 |
| U68 | EFB7510 | Bell 202 Compatible Modem, DIP-16/SO-16 |
| U69 | MC6850 | Asynchronous Communications Interface Adapter 1MHz, DIP-40 |
| U72,U75 | 6821 | Peripheral Interface Adapter 1MHz, DIP-40 |
| C1,C6 | 10pF | Unpolarized capacitor |
| C2 | 10nF | Unpolarized capacitor |
| C3,C4 | 15pF | Unpolarized capacitor |
| C5 | 22pF | Unpolarized capacitor |
| C7,C8,C15,C16 | 10uF 50V | Polarized capacitor |
| C9,C11-C13,C17-C27,C29-C72 | 100nF | Unpolarized capacitor |
| C10 | 68pF | Unpolarized capacitor |
| C14 | ?? | Unpolarized capacitor |
| C28 | NC | Unpolarized capacitor |
| D1-D3 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| J1 | Conn_01x06_Socket | Generic connector, single row, 01x06, script generated |
| J2 | Conn_02x20_Odd_Even | Generic shielded connector, double row, 02x20, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3,J10 | DA15_Socket | 15-pin D-SUB connector, socket (female) (low-density/2 columns) |
| J4 | DB25_Socket | 25-pin D-SUB connector, socket (female) |
| J5,J9 | DIN-5_180degree | 5-pin DIN connector (5-pin DIN-5 stereo) |
| J6 | DE9_Socket | 9-pin D-SUB connector, socket (female) |
| J7,J8 | DE9_Pins | 9-pin D-SUB connector, pins (male) |
| J11 | Conn_01x22_Socket | Generic connector, single row, 01x22, script generated |
| P1 | VR10K | Potentiometer |
| R1,R4-R7,R10,R11,R13,R16,R18-R21,R38,R39 | 1K | Resistor |
| R2,R9,R14,R49 | 330R | Resistor |
| R3,R8,R15,R46 | 220R | Resistor |
| R12,R23,R26,R29,R30,R33-R35,R37,R40-R42 | 10K | Resistor |
| R17 | 2K2 | Resistor |
| R22,R48 | 4K7 | Resistor |
| R24 | 330K | Resistor |
| R25,R27,R36 | 47K | Resistor |
| R28 | 33K3 | Resistor |
| R31,R47 | 470R | Resistor |
| R32 | 22K | Resistor |
| R43-R45 | 4.7K | Resistor |
| Y1 | 14MHz | Two pin crystal |
| Y2 | 3.579MHz | Two pin crystal |