Loading design…
jeevan9s
home automation controller
| Reference | Value | Description |
|---|---|---|
| Q1 | DMP6023LE-13 | -27A Id, -60V Vds, QFET P-Channel MOSFET, TO-220 |
| Q2,Q3 | AO3400A | N-Channel Mosfet |
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | TPS5405DR | Buck Converter IC (Fixed Vout 5V) |
| U3,U4 | ID_LM66100DCKR | ID Diodes |
| U5 | ADS1115IDGS | Ultra-Small, Low-Power, I2C-Compatible, 860-SPS, 16-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator, VSSOP-10 |
| U6,U7 | SI2301 | P-Channel Mosfet |
| U8 | TMC2209 | Stepper Motor Driver |
| U9 | TPD2E001DRLR | |
| C1,C41 | 100uF | Polarized capacitor |
| C2,C10,C16,C17,C19,C25,C26,C37 | 10uF | Unpolarized capacitor |
| C3 | 47 nF | Unpolarized capacitor |
| C4 | 3.3nF | Unpolarized capacitor |
| C5 | 47nF | Unpolarized capacitor |
| C6,C9 | 47uF | Unpolarized capacitor |
| C7 | 0.47uF | Unpolarized capacitor |
| C8 | 22uF | Unpolarized capacitor |
| C11,C12 | 1uF | Unpolarized capacitor |
| C13-C15,C18,C20-C24,C28,C31,C32,C34-C36,C42,C43 | 0.1uF | Unpolarized capacitor |
| C27 | 2.2uF | Unpolarized capacitor |
| C29 | 22nF | Unpolarized capacitor |
| C30 | 4.7uF | Unpolarized capacitor |
| C33 | 220uF | Polarized capacitor, EEE-FK1V221P i |
| D1 | SS24 | 40V 1A Schottky Diode, SMA |
| D2 | SMAJ15A | 400W unidirectional Transient Voltage Suppressor, 15.0Vr, SMA(DO-214AC) |
| D3 | D_Zener | Zener diode |
| D4 | 12V-LED | Light emitting diode |
| D5 | 3V3-LED | Light emitting diode |
| D6 | BUCK-LED | Light emitting diode |
| D7 | SYS-LED | Adressable RGB LED |
| D8 | WIFI-LED | Light emitting diode |
| D9 | DEBUG-LED | Light emitting diode |
| D12 | P0D | Diode |
| D13 | P1D | Diode |
| D14 | USB-LED | Light emitting diode |
| F1 | Polyfuse | 2.6A 18V PTC Resettable Fuse |
| FB1 | FerriteBead | Ferrite bead |
| J1 | Barrel_Jack | DC Barrel Jack |
| J2 | USB_C_Female_USB2_Small | USB-C Connector |
| J3 | SMS-CONN-0 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | SMS-CONN-1 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | ALS_CONN | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | PUMP0-CONN | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | PUMP1-CONN | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | STEP-CONN | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | L | Inductor |
| R1 | 15k | Resistor |
| R2,R3 | 100k | Gate Pull-Down Resistor,Resistor |
| R4,R5 | 4.7K | Current Limiting Resistor,Resistor |
| R6,R15-R18,R21,R23,R27 | 1k | Current Limiting Resistor,Resistor |
| R7,R30 | 330 | Resistor |
| R8 | 47 | Resistor |
| R10,R11 | 5.1k | Resistor |
| R12-R14 | 4.7k | Resistor |
| R19,R20,R22,R24,R29,R31 | 10k | Resistor |
| R25,R26 | 0.11 | Resistor |
| R28 | 1.5k | Resistor |
| SW1 | SW_RESET | Push button switch, generic, two pins |
| SW2 | SW_BOOT | Push button switch, generic, two pins |
| TP1 | TX | test point |
| TP2 | RX | test point |
| TP3 | TP_5V-U | test point |
| TP4 | TP_12V | test point |
| TP5 | TP_3V3 | test point |
| TP6 | TP-5V-B | test point |
| TP7 | TP-GND | test point |
| VR1 | LM3940IMP-3.3_NOPB | LDO (5V-3.3V) |