Loading design…
iZboxo
PCB for ZdeHav Changer
| Reference | Value | Description |
|---|---|---|
| Q1 | IRLL024NTRPBF | |
| Q2 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| U1 | STM32G0B1CBTx | STMicroelectronics Arm Cortex-M0+ MCU, 128KB flash, 144KB RAM, 64 MHz, 1.7-3.6V, 44 GPIO, LQFP48 |
| U2 | SN65HVD230 | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
| U3 | LMR51430 | 4.5-V to 36-V, 3-A synchronous buck converter with 40-µA IQ, SOT-23-6 |
| U4 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U5 | TMC2209-LA | 2-phase stepper motor driver, 256 µSteps, 2.8A peak, 2.0A RMS, VS = 4.75..29V, STEP/DIR and UART interface, VQFN-28 |
| U6 | MCP6022 | Dual Operational Amplifiers, Rail-to-Rail Input/Output, DIP-8/SOIC-8/TSSOP-8 |
| C1,C13,C14,C19 | 10u | Unpolarized capacitor, small symbol |
| C2,C3,C6,C9,C11,C15-C17,C20,C27-C30 | 100n | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C4,C5,C10 | 1u | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C7,C8 | 10p | Unpolarized capacitor, small symbol |
| C12 | 47u | Unpolarized capacitor |
| C18 | 100u | Polarized capacitor, small symbol |
| C21 | 4.7u | Unpolarized capacitor, small symbol |
| C22 | 22n | Unpolarized capacitor, small symbol |
| C23-C26 | 1n | Unpolarized capacitor, small symbol |
| D1,D2 | D_Schottky | Schottky diode |
| D3 | RED | Light emitting diode |
| D4 | WS2812B | RGB LED with integrated controller |
| D5 | BLUE | Light emitting diode |
| D6 | GREEN | Light emitting diode |
| D7 | BAV99W | |
| D8,D10 | SK310A-TP | |
| D9,D11 | GRN | |
| D12 | D_Small | Diode, small symbol |
| DNF1 | R_Small | Resistor, small symbol |
| FB1 | FerriteBead_Small | Ferrite bead, small symbol |
| J4 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| J5-J7 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
| J8 | PiezoConnector | Generic connector, single row, 01x02, script generated |
| L1 | 3.3uH 21.2mOhm | Inductor |
| L2-L6 | BLM18KG121TN1D | Inductor with ferrite core |
| R1,R14,R22,R23 | 10k | Resistor,Resistor, small symbol |
| R2,R3 | 5k1 | Resistor, small symbol |
| R4 | 162k | Resistor |
| R5 | 22.1k | Resistor |
| R6-R8,R15 | 1k5 | Resistor |
| R9,R10 | R22 | Resistor, small symbol |
| R11 | 4k7 | |
| R12,R13 | 2k37 | |
| R16,R17 | 100R | |
| R18,R19,R24,R25,R77 | 100k | Resistor, small symbol |
| R20,R21 | 1k | Resistor, small symbol |
| R26 | 120R | Resistor, small symbol |
| RV1,RV2 | 10K | Trim-potentiometer |
| SW1 | SW_SPDT | Switch, single pole double throw |
| TH1,TH2 | NTCG104LH104JTDS | |
| TP1 | TestPoint | test point |
| Y1 | 16MHz/10pF | Four pin crystal, GND on pins 2 and 4 |