Locust
hlord2000
A Cricut Joy hardware replacement
Components (39)
| Reference | Value | Description |
|---|---|---|
| Q1-Q6 | NMOS | |
| U1,U2 | DRV8847RTE | |
| U3 | nRF5340-QKXX | |
| U4 | MX25L3233FZN | |
| U5 | AP63203WU | |
| U6 | AP63205WU | |
| U7 | USBLC6-2SC6 | |
| C1,C3,C7,C8,C11,C12 | 22u | |
| C2,C4 | 0.1u | |
| C5,C10,L3,L4 | 10u | |
| C6,C9,C13,C14,C17-C24,C27,C32,C33,C37-C40 | 100n | |
| C15,C16,C26,C28,C31,C36 | 1u | |
| C25,C30,L1,L2 | 4.7u | |
| C29,L5 | 2.2n | |
| C34 | 0.7p | |
| C35 | NC | |
| D1 | D_TVS | Bidirectional transient-voltage-suppression diode |
| F1 | 500mA | |
| F2 | 3A | Resettable fuse, polymeric positive temperature coefficient, small symbol |
| FB1,FB3,FB4 | 100R @ 100MHz | |
| FB2 | 100R @ 100 MHz | |
| H1-H4 | MountingHole_Pad | Mounting Hole with connection |
| J1-J3 | JST PH S3B | |
| J4 | Conn_01x06_MountingPin | |
| J5 | Conn_01x12_MountingPin | |
| J6 | Conn_01x05_MountingPin | |
| J7 | Barrel_Jack_MountingPin | |
| J8 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | USB_C_Receptacle_USB2.0 | |
| J10 | TC2030_SWD | |
| N1 | Housing_Pad | Housing with connection pin |
| R1-R4 | R_Small_US | |
| R5-R7 | 200R | |
| R8,R9 | 5.1k | |
| R10-R15 | 100k | Resistor, small US symbol |
| TP1 | UART_TX | test point |
| TP2 | UART_RX | test point |
| Y1 | 32MHz | |
| Y2 | 32.768kHz |