bench_psu
henrides
Components (26)
| Reference | Value | Description |
|---|---|---|
| Q1-Q3,Q5 | 2N3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, TO-92 |
| Q4 | TIP32C | -6A Ic, -100V Vce, Power PNP Transistor, TO-220 |
| U1 | LM7805_TO220 | Positive 1A 35V Linear Regulator, Fixed Output 5V, TO-220 |
| U2 | MCP4812 | 2-Channel 10-Bit D/A Converters with SPI Interface and Internal Reference (2.048V) |
| U3 | LM4040LP-4.1 | 4.096V Precision Micropower Shunt Voltage Reference, TO-92 |
| U4 | MCP6004 | 1MHz, Low-Power Op Amp, DIP-14/SOIC-14/TSSOP-14 |
| U5 | MCP3002 | Dual Channel 10-Bit A/D Converter with SPI Serial Interface |
| U6 | INA180A1 | Current Sense Amplifier, 1 Circuit, Rail-to-Rail, 26V, Gain 20 V/V, SOT-23-5 |
| C1,C3,C5,C6,C8 | 1uF | Unpolarized capacitor |
| C2 | 6800uF | Polarized capacitor |
| C4 | 10uF | Polarized capacitor |
| C7 | 1000uF | Polarized capacitor |
| D1 | KBP206G | Silicon Bridge Rectifier, 250V Vrms, 1.5A If, pins=-AA+, SIL-package |
| D2 | SB540 | Diode |
| D3 | 1N4007 | Diode |
| F1 | 1.5A | Fuse |
| HS1 | Heatsink_Pad | Heatsink with electrical connection, 1 pin |
| J1,J3 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| K1 | G6A | Industry-Standard 2-pole relay, designed to switch 2A Signal Loads, Single-side Stable |
| R1,R4-R6,R10,R14 | 5100 | Resistor |
| R2,R3 | 680 | Resistor |
| R7,R13 | 330 | Resistor |
| R8,R9,R15,R16 | 1000 | Resistor |
| R11 | 9100 | Resistor |
| R12 | 0.1 | Resistor |