py32_canbus_dev
gpgreen
Development Board utilizing ARM M0 - Puya32 MCU and CAN bus with MCP2518
Components (27)
| Reference | Value | Description |
|---|---|---|
| U1 | UA78M33CDCYR | Positive 1A 35V Linear Regulator, Fixed Output 5V, TO-220/TO-263 |
| U2 | PY32F030K1xT | 32-bit ARM Cortex-M0+ microcontroller |
| U3 | MCP2518FD-E/QBB | CAN FD Controller with SPI Interface, up to 8 Mbps, Vdd 2.7..5.5V, functional safety ready, VDFN-14 |
| U4 | MCP2562FD-E/MF | High-Speed CAN Transceiver, 1Mbps, 5V supply, Vio pin, -40C to +125C, SOIC-8 |
| U5 | FT230XQ | Full Speed USB to Basic UART, QFN-16 |
| C1 | 10nF | Polarized capacitor |
| C2 | 0.33uf | Polarized capacitor |
| C3 | 10uf | Polarized capacitor |
| C4,C5,C11,C12,C14 | 0.1uf | Unpolarized capacitor |
| C6-C9 | 22pf | Unpolarized capacitor |
| C10,C13,C15 | 0.1 uF | Unpolarized capacitor |
| D1 | RED | Light emitting diode |
| D2,D4,D5 | GREEN | Light emitting diode |
| D3 | CDSOT23-T24CAN | 7V/12V, 600W Asymmetrical TVS Diode Array, SOT-23 |
| FB1 | CBG321609U121T | Ferrite bead |
| H1-H4 | MountingHole | Mounting Hole without connection |
| J2,J3 | Conn_01x18 | Generic connector, single row, 01x18, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | CAN1 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | USB_B_Micro | USB Micro Type B connector |
| JP5 | Boot | Solder Jumper, 3-pole, open |
| R1 | 470 | Resistor |
| R2,R3,R6 | 680 | Resistor |
| R4 | 120 | Resistor |
| R5,R7 | 10K | Resistor |
| SW2 | Reset | Push button switch, generic, two pins |
| Y1 | 24MHz | Four pin crystal, GND on pins 2 and 4, small symbol |
| Y2 | 40MHz | Four pin crystal, GND on pins 2 and 4, small symbol |