Loading design…
goldenjinjo
Breakout board for STM32H723ZGT6. Demo board for STM32 MCUs. WIP.
| Reference | Value | Description |
|---|---|---|
| U1 | STM32H723ZGT6 | STMicroelectronics Arm Cortex-M7 MCU, 1024KB flash, 564KB RAM, 550 MHz, 1.62-3.6V, 114 GPIO, LQFP144 |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U3 | XC6206P332MR-G | Positive 60-250mA Low Dropout Regulator, Fixed Output, SOT-23 |
| U4 | LSM6DSRTR | |
| BZ1 | Buzzer | |
| C1-C13,C17,C24-C26,C28 | 100nF | Unpolarized capacitor |
| C14,C27 | 10uF | Unpolarized capacitor |
| C15 | 1uF_vdd_usb | Unpolarized capacitor |
| C16,C19-C21 | 1uF | Unpolarized capacitor |
| C18 | 10nF | Unpolarized capacitor |
| C22,C23 | 10pF | Unpolarized capacitor |
| C29,C30 | 2.2uF | Unpolarized capacitor |
| C31-C37 | 1nF | Unpolarized capacitor |
| D1,D2,D4 | D_Schottky | Schottky diode |
| D3 | USB_R_LED | |
| D5 | PSM712-LF-T7 | 19V 13.3V 12V SOT-23 ESD and Surge Protection (TVS/ESD) ROHS |
| D6 | LED | Light emitting diode |
| D7 | 3V3_R_LED | |
| FB1,FB2 | 100R | Ferrite bead |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
| J3 | I2C | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | SPI | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | UART | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | USART | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R4,R21,R23 | 10k | Resistor |
| R2 | 33k | Resistor |
| R3 | 82k | Resistor |
| R5,R9 | 1k | Resistor |
| R6,R7 | 5k1 | Resistor |
| R8 | 0 | Resistor |
| R10-R13,R15-R18 | 100 | Resistor |
| R19,R20,R22,R24 | 4.7k | Resistor |
| SW1 | BOOT0 | Switch, single pole double throw |
| Y1 | 16MHz | Four pin crystal, GND on pins 2 and 4 |