SR-Aktor
gerryvel
Switch Relais Aktor N2k
Components (20)
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | BCR523 | NPN SOT-23 Pre-Biased transistor, 50V, 500mA, 330mW, Alternate KiCAD Library |
| U1 | TSR_1-2450 | 1A step-down regulator module, fixed 5V output voltage, 5-36V input voltage, -40°C to +85°C temperature range, TO-220 compatible LM78xx replacement |
| U2 | ESP32-Huzzah | RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U3 | SN65HVD230 | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
| C1 | C10µ | Unpolarized capacitor |
| C2 | C22µ | Unpolarized capacitor |
| D1 | P4SMAJ26CA | SMA Bidirectional TVS Diode, 26V, 400W, Alternate KiCAD Library |
| D2 | B360 | 60V 3A Schottky Barrier Rectifier Diode, SMC |
| D3 | SMCJ6.5CA | SMC Bidirectional TVS Diode, 6.5V, 1500W, Alternate KiCAD Library |
| D4 | LED_RBKG | RGB LED, red/cathode/blue/green |
| D5 | PESD1CAN | SOT-23 Dual bidirectional TVS diode for CAN bus protection, 24V, 200W, Alternate KiCAD Library |
| D6-D8 | S1G | SMA Diode, Rectifier, 400V, 1A, Alternate KiCad Library |
| FL1 | EPCO B82789C0513 | EMI 2-inductor filter, pin-connections 1-4 and 2-3 |
| J1 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J2 | Conn_02x03_Pin | Generic connector, single row, 01x06, script generated |
| K1-K3 | IM03 | IM Relay, standard version, monostable, switching current 2/5A, power 60W/62.5VA, voltage 220VDC/250VAC |
| N1 | Housing | Housing |
| R1 | 300R | Resistor |
| R2 | 10k | Resistor |
| RV1 | B72530T0300K062 | Voltage dependent resistor |