| QP1 | IRLZ44N | 47A Id, 55V Vds, 22mOhm Rds Single N-Channel HEXFET Power MOSFET, TO-220AB |
|---|
| U2 | DHT11 | 3.3V to 5.5V, temperature and humidity module, DHT11 |
|---|
| U6 | MT3608 | High Efficiency 1.2MHz 2A Step Up Converter, 2-24V Vin, 28V Vout, 4A current limit, 1.2MHz, SOT23-6 |
|---|
| BAT1 | Battery_Cell | Single-cell battery |
|---|
| C1 | Arduino Nano 5V | Arduino Nano v2.x |
|---|
| D1 | 1N5819 | 40V 1A Schottky Barrier Rectifier Diode, DO-41 |
|---|
| DP1 | 1N4007 | 1000V 1A General Purpose Rectifier Diode, DO-41 |
|---|
| IN1 | Power IN Terminal | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J1-J8 | RJ45 | RJ connector, 8P8C (8 positions 8 connected) |
|---|
| LEVEL1 | ? | Dual-Supply, 8-Bit Signal Translator with Configurable Voltage Supplies and Signals Levels, 3-State Outputs and Auto Direction Sensing, WQFN-20 |
|---|
| MAX1,MAX485 | MAX485 | Half duplex RS-485/RS-422, 2.5 Mbps, Β±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8 |
|---|
| NPN? | 2N2222 | 800mA Ic, 50V Vce, NPN Transistor, TO-39 |
|---|
| PMOS1 | IRF9540N | -23A Id, -100V Vds, 117mOhm Rds, P-Channel HEXFET Power MOSFET, TO-220 |
|---|
|