hardware
formicidae-tracker
Hardware repository for the FORT system
Components (41)
| Reference | Value | Description |
|---|---|---|
| U1 | W25Q16JVUXIQ | 16Mb Serial Flash Memory, Standard/Dual/Quad SPI, SOIC-8 |
| U2 | RP2040 | A microcontroller by Raspberry Pi |
| U3 | LMR36506R3RPER | Synchronous Buck Regulator, Vin=3-65V, Iout=600mA, F=0.2-2.2MHz, Adjustable output voltage, PFM at light load, VQFN-HR RPE |
| U4-U7 | THVD8010 | RS-485 Half-duplex 30kbps transceiver with OOK Modulation for Power Line Communication, SOT-23 |
| U8 | TCAN3414 | High-Speed CAN Transceiver, 1Mbps, 3.3V supply, silent mode, shutdown mode, SOT-23-8/SOIC-8 |
| U9,U11,U12 | 74LVC1G17 | Single Schmitt Buffer Gate, Low-Voltage CMOS |
| U10 | LTV-827S | DC Optocoupler, Vce 35V, CTR 50%, SMDIP-8 |
| C1,C2 | 15p | |
| C3,C7 | 2u2 | Unpolarized capacitor |
| C4-C6,C8-C13,C15,C17,C19,C22,C25,C28,C31,C33-C35 | 100n | Unpolarized capacitor |
| C14 | 2.2u | Unpolarized capacitor |
| C16 | 1u | Unpolarized capacitor |
| C18 | 22u | Unpolarized capacitor |
| C20,C21,C23,C24,C26,C27,C29,C30 | 180n | Unpolarized capacitor |
| C32 | 1n | Unpolarized capacitor |
| D1-D4 | CDSOT23-SM712 | Bidirectional dual transient-voltage-suppression diode, center on pin 3 |
| D5 | CDSOT23-T24CAN | Bidirectional dual transient-voltage-suppression diode, center on pin 3 |
| D6 | BAT54J | 30V 200mA Schottky diode, SOD-323F |
| D7 | GREEN | Light emitting diode |
| D8 | YELLOW | Light emitting diode |
| D9-D12 | SMAJ51CA | 400W bidirectional Transient Voltage Suppressor, 51.0Vr, SMA(DO-214AC) |
| D13 | SMAJ48CA | 400W bidirectional Transient Voltage Suppressor, 51.0Vr, SMA(DO-214AC) |
| J1,J2 | JST SH | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Jack-DC OD 5.5 IN 2.1 | DC Barrel Jack |
| J4-J7 | JST XH | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | .100 Header stackable | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9,J10 | JST PH | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11-J15 | Phoenix MCV_1,5 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP1 | Term | Jumper, 2-pole, open |
| JP2 | .100 Header | Jumper, 3-pole, pins 1+2 closed/bridged |
| L1 | 8.2u | Inductor |
| L2-L9 | 330u | Inductor |
| R1,R18,R19 | 15k | Resistor |
| R2,R14,R16 | 1k | Resistor |
| R3 | 62 | Resistor |
| R4 | 240 | Resistor |
| R5,R7,R9,R11 | 47k | Resistor |
| R6,R8,R10,R12,R13 | 120 | Resistor |
| R15,R17 | 180 | Resistor |
| TP1-TP13 | 5019 | test point |
| Y1 | ABM8-272-T3 |