EL-Load
fietser28
Components (57)
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | BSS138W | |
| U1 | MAX31760 | |
| U2 | SN6505BDBV | |
| U3 | BD00FC0WFP-E2 | |
| U4 | Si8602AB | |
| U5,U9 | AMS1117-3.3 | |
| U6 | MCP23017_SO | |
| U7 | AZ1117-5.0 | |
| U8 | SC0915 | Raspberry Pi Pico Embedded Dev Module | Raspberry Pi SC0915 |
| U10 | MC34063AD | |
| U11 | 24C64 | |
| BZ1 | Buzzer | |
| C1,C4,C6,C7,C13,C15,C18-C20,C22-C24,C26,C30,C32,L2,L3,L8 | 10u | |
| C2,C14,C29 | 1u | |
| C5,C8-C11,C16,C17,C21,C31 | 100n | |
| C12 | 2.2u | |
| C25,C28 | 100u | |
| C27 | 200p | |
| D1-D3,D7-D9 | MBR0530 | |
| D5,D10,D17 | SS14 | |
| D6,D12,D13,D19 | LED | |
| D14,D15 | 16V | |
| D16 | 20V | |
| D18 | BZV55B5V6 | |
| F1 | 1A | |
| J1,J2 | Conn_01x02 | |
| J5 | PN sensor | |
| J7,J8 | PinHeader 2x08 P2.54mm | |
| J9 | SWD+UART header | |
| J10 | Power for serial interface | |
| J11 | IDC-Header 2x08 P2.54mm | |
| J12 | Conn_01x05_Pin | |
| JP1 | SolderJumper_2_Bridged | |
| JP3 | Fan Volt/PWM | |
| JP4-JP6,JP9 | Jumper_2_Bridged | |
| JP7 | Jumper_3_Bridged12 | |
| JP8 | Select Fan Voltage | |
| JP10 | Select 5V source | |
| JP11 | HW V3/V4 | |
| JP12 | LDO En | |
| JP13 | PWM 2 LDO/PWM | |
| L1 | SRF0905-202Y | |
| L4 | 100u / 300mA | |
| M1,M2 | Fan_4pin | |
| PCB1 | Logo_Open_Hardware_Small | |
| R1,R2 | 4k7 | |
| R3,R6 | 10 | |
| R4,R14,R18,R21,R23,R28 | 10k | |
| R5,R7,R8,R29,R30 | 1k | |
| R9 | 39k | |
| R10,R11,R24 | 3k3 | |
| R12,R13,R15,R16,R19,R20,R26,R27 | 3k | |
| R17,R25,R31 | 20k | |
| R22 | 0.3 | |
| SW1 | Pico Reset | |
| T2 | Wuerth_750316031 | |
| TP1,TP2,TP4,TP5 | TestPoint_Probe |